Issue 16, 2013

Time-resolved, laser initiated detonation of TATP supports the previously predicted non-redox mechanism

Abstract

Our previously reported computational study of the decomposition pathways of triacetone triperoxide (TATP), 1, predicted that unlike most energetic materials, which involve self-combustion of fuel and oxidants, 1 decomposes via a thermoneutral, non-redox pathway that involves entropy burst. These predictions are now corroborated by time-resolved monitoring of deflagration or detonation of 1 using a fast video camera following initiation by a short pulse focused laser beam. While a fireball always accompanies the explosion of 1 under air, the formation of a fireball is totally prevented under a nitrogen atmosphere. These observations indicate that combustion of the gaseous primary products occurs as a secondary event only in the presence of exogenous oxygen. The composition of the product mixture was found to depend on the experimental conditions. With long pulse focused laser beam (150 μs at 1064 nm) at either 210 or 110 mJ, the small amounts of charcoal needed for initiation suggest that the energy required to initiate 1 by pulse laser is 4–10 mJ, much smaller than the energy required for initiation by either mechanical stress or electric discharge. This time-resolved study highlights the very unusual properties of the peroxide based explosives.

Graphical abstract: Time-resolved, laser initiated detonation of TATP supports the previously predicted non-redox mechanism

Supplementary files

Article information

Article type
Paper
Submitted
23 Dec 2012
Accepted
04 Mar 2013
First published
05 Mar 2013

Phys. Chem. Chem. Phys., 2013,15, 6041-6048

Time-resolved, laser initiated detonation of TATP supports the previously predicted non-redox mechanism

V. Bulatov, O. Reany, R. Grinko, I. Schechter and E. Keinan, Phys. Chem. Chem. Phys., 2013, 15, 6041 DOI: 10.1039/C3CP44662J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements