Issue 7, 2013

NiCo2O4nanowire arrays supported on Ni foam for high-performance flexible all-solid-state supercapacitors

Abstract

Portable electronic devices which are ultrathin, lightweight and even able to roll-up have attracted much attention. Herein, we report the design of flexible all-solid-state symmetric supercapacitors by using two NiCo2O4 nanowire arrays supported on Ni foams as the electrodes. The as-fabricated symmetric supercapacitors have excellent electrochemical performance with a high cell areal capacitance of 161 mF cm−2 at 1 mA cm−2. Good electrochemical performance stability over 3000 cycles was obtained even when the device was under harsh mechanical conditions including both twisted and bent states. As-fabricated all-solid-state supercapacitors could be charged and power a commercial light-emitting-diode, demonstrating their feasibility as an efficient energy storage component and self-powered micro/nano-system. In addition, we were able to grow NiCo2O4 nanowire arrays on many kinds of flexible substrates, including nickel foam, carbon cloth, Ti foil and polytetrafluoroethylene tape. Our work here opens up opportunities for the device configuration for energy-storage devices in the future wearable electronic area and many other flexible, lightweight and high performance functional nanoscale devices.

Graphical abstract: NiCo2O4 nanowire arrays supported on Ni foam for high-performance flexible all-solid-state supercapacitors

Supplementary files

Article information

Article type
Paper
Submitted
26 Oct 2012
Accepted
17 Dec 2012
First published
18 Dec 2012

J. Mater. Chem. A, 2013,1, 2468-2473

NiCo2O4 nanowire arrays supported on Ni foam for high-performance flexible all-solid-state supercapacitors

Q. Wang, X. Wang, B. Liu, G. Yu, X. Hou, D. Chen and G. Shen, J. Mater. Chem. A, 2013, 1, 2468 DOI: 10.1039/C2TA01283A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements