Issue 18, 2015

p-type ZnTe:Ga nanowires: controlled doping and optoelectronic device application

Abstract

Although significant progress has been achieved in the synthesis and doping of ZnTe nanostructures, it remains a major challenge to rationally tune their transport properties for nanodevice applications. In this work, p-type ZnTe nanowires (NWs) with tunable conductivity were synthesized by employing Ga/Ga2O3 as a dopant via a simple thermal evaporation method. Electrical measurements of back-gate metal-oxide field-effect-transistors based on a single NW revealed that when the Ga content in the ZnTe NWs increases from 1.3 to 5.1 and 8.7%, the hole mobility and hole concentration will increase from 0.0069 to 0.33 to 0.46 cm2 V−1 s−1, respectively. It was also found that the photodetector composed of a ZnTe:Ga NW/graphene Schottky diode exhibited high sensitivity to visible light illumination with an on/off ratio as high as 102 at reverse bias, with good reproducibility. The responsivity and detectivity were estimated to be 4.17 × 103 A W−1 and 3.19 × 1013 cm Hz1/2 W−1, higher than other ZnTe nanostructure based photodetectors. It is expected that the ZnTe:Ga NWs with controlled p-type conductivity are promising building blocks for fabricating high performance nano-optoelectronic devices in the future.

Graphical abstract: p-type ZnTe:Ga nanowires: controlled doping and optoelectronic device application

Article information

Article type
Paper
Submitted
08 Nov 2014
Accepted
19 Jan 2015
First published
19 Jan 2015

RSC Adv., 2015,5, 13324-13330

p-type ZnTe:Ga nanowires: controlled doping and optoelectronic device application

L. Luo, S. Zhang, R. Lu, W. Sun, Q. Fang, C. Wu, J. Hu and L. Wang, RSC Adv., 2015, 5, 13324 DOI: 10.1039/C4RA14096F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements