Issue 79, 2015

An environmentally-friendly enzyme-based nanofibrous membrane for 3,3′,5,5′-tetrabromobisphenol removal

Abstract

Chitosan (CS)/poly(vinyl alcohol) (PVA) nanofibrous membranes have inherently poor mechanical strength. To improve the mechanical strength of these membranes, nanocrystalline cellulose (NCC) prepared by a simplified method was added to the former system. The results showed that the tensile strength of the membrane with 5% NCC addition was 370% higher than that of the membrane without NCC. Horseradish peroxidase (HRP) was immobilized on the membrane through covalent binding with HRP previously activated with 1,1′-carbonyldiimidazole, and the maximum enzyme loading was approximately 384 mg g−1. The physical, chemical properties of immobilized HRP and its application in 3,3′,5,5′-tetrabromobisphenol (TBBPA) removal were examined. The results showed that HRP immobilized on CS/PVA–NCC membranes showed greater stability and reusability than free HRP and the membrane without NCC. The former also exhibited an effective performance (95.9% removal, 3 h) for TBBPA removal under the optimum conditions (pH 7, 35 °C). The results showed that HRP immobilized on NCC-incorporated CS/PVA membranes could be used to remove brominated flame-retardants, especially TBBPA from wastewater. Thus, these membranes have potential industrial applications.

Graphical abstract: An environmentally-friendly enzyme-based nanofibrous membrane for 3,3′,5,5′-tetrabromobisphenol removal

Supplementary files

Article information

Article type
Paper
Submitted
15 May 2015
Accepted
21 Jul 2015
First published
21 Jul 2015

RSC Adv., 2015,5, 64091-64097

Author version available

An environmentally-friendly enzyme-based nanofibrous membrane for 3,3′,5,5′-tetrabromobisphenol removal

R. Xu, R. Tang, S. Liu, F. Li and B. Zhang, RSC Adv., 2015, 5, 64091 DOI: 10.1039/C5RA09090C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements