Issue 22, 2017

Self-assembled indium tin oxide nanoball-embedded omnidirectional reflectors for high photon extraction efficiency in III-nitride ultraviolet emitters

Abstract

The control of the refractive index and electrical conductivity in the dielectric layer of omnidirectional reflectors (ODRs) is essential to improve the low efficiency of AlGaN-based UV emitters. Here, we report self-assembled indium tin oxide (ITO) nanoball-embedded omnidirectional reflectors (NODRs) for use in high-efficiency AlGaN-based UV emitters at 365 nm. These NODRs consisted of a reflective Al layer, a self-assembled conducting ITO nanoball layer for current injection and spreading, and nanovoids that provided a low refractive index to achieve highly efficient UV emitters. The NODR was able to realize both high electrical conductivity and reflectivity by decreasing the average refractive index of the ITO nanoball layers. We observed diffuse reflection as well as omnidirectional reflection from the NODR UV emitters because of the corrugated interfaces of the nanovoids, ITO nanoball layer, and Al layer. These structural and optical properties of the NODRs remarkably increased the output power of a UV emitter by a Lambertian enhancement factor of 57% at an injection current of 50 mA at all emission angles compared with that of an ITO film/Al UV emitter.

Graphical abstract: Self-assembled indium tin oxide nanoball-embedded omnidirectional reflectors for high photon extraction efficiency in III-nitride ultraviolet emitters

Article information

Article type
Paper
Submitted
09 Feb 2017
Accepted
28 Apr 2017
First published
03 May 2017

Nanoscale, 2017,9, 7625-7630

Self-assembled indium tin oxide nanoball-embedded omnidirectional reflectors for high photon extraction efficiency in III-nitride ultraviolet emitters

S. Oh, K. J. Lee, S. Kim, K. Ha, J. Jeong, D. Kim, K. Kim and S. Park, Nanoscale, 2017, 9, 7625 DOI: 10.1039/C7NR00957G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements