Issue 37, 2017

The dendritic effect and magnetic permeability in dendron coated nickel and manganese zinc ferrite nanoparticles

Abstract

The collective magnetic properties of nanoparticle (NP) solid films are greatly affected by inter-particle dipole–dipole interactions and therefore the proximity of the neighboring particles. In this study, a series of dendritic ligands (generations 0 to 3, G0–G3) have been designed and used to cover the surface of magnetic NPs to control the spacings between the NP components in single lattices. The dendrons of different generations introduced here were based on the 2,2-bis(hydroxymethyl)propionic acid (Bis-MPA) scaffold and equipped with an appropriate surface binding group at one end and several fatty acid segments at the other extremity. The surface of the NPs was then modified by partial ligand exchange between the primary stabilizing surfactants and the new dendritic wedges. It was shown that this strategy permitted very precise tuning of inter-particle spacings in the range of 2.9–5.0 nm. As expected, the increase in the inter-particle spacings reduced the dipole–dipole interactions between magnetic NPs and therefore allowed changes in their magnetic permeability. The dendron size and inter-particle distance dependence was studied to reveal the dendritic effect and identify the optimal geometry and generation.

Graphical abstract: The dendritic effect and magnetic permeability in dendron coated nickel and manganese zinc ferrite nanoparticles

Supplementary files

Article information

Article type
Communication
Submitted
04 Aug 2017
Accepted
19 Aug 2017
First published
21 Aug 2017

Nanoscale, 2017,9, 13922-13928

The dendritic effect and magnetic permeability in dendron coated nickel and manganese zinc ferrite nanoparticles

D. Jishkariani, J. D. Lee, H. Yun, T. Paik, J. M. Kikkawa, C. R. Kagan, B. Donnio and C. B. Murray, Nanoscale, 2017, 9, 13922 DOI: 10.1039/C7NR05769E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements