Issue 50, 2020

Microwave dielectric properties of low-temperature-fired MgNb2O6 ceramics for LTCC applications

Abstract

MgNb2O6 ceramics doped with (Li2O–MgO–ZnO–B2O3–SiO2) glass were synthesized by the traditional solid phase reaction route. The effects of LMZBS addition on microwave dielectric properties, grain growth, phase composition and morphology of MgNb2O6 ceramics were studied. The SEM results show dense and homogeneous microstructure with grain size of 1.72 μm. Raman spectra and XRD patterns indicate the pure phase MgNb2O6 ceramic. The experimental results show that LMZBS glass can markedly decrease the sintering temperature from 1300 °C to 925 °C. Higher density and lower porosity make ceramics have better dielectric properties. The MgNb2O6 ceramic doped with 1 wt% LMZBS glass sintered at 925 °C for 5 h, possessed excellent dielectric properties: εr = 19.7, Q·f = 67 839 GHz, τf = −41.01 ppm °C−1. Moreover, the favorable chemical compatibility of the MgNb2O6 ceramic with silver electrodes makes it as promising material for low temperature co-fired ceramic (LTCC) applications.

Graphical abstract: Microwave dielectric properties of low-temperature-fired MgNb2O6 ceramics for LTCC applications

Article information

Article type
Paper
Submitted
13 Jun 2020
Accepted
06 Aug 2020
First published
12 Aug 2020
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2020,10, 29835-29842

Microwave dielectric properties of low-temperature-fired MgNb2O6 ceramics for LTCC applications

C. Wu, Y. Hu, S. Bao, G. Wang, P. Jiang, J. Chen, Z. Duan and W. Deng, RSC Adv., 2020, 10, 29835 DOI: 10.1039/D0RA05211F

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements