Issue 14, 2022

A fast response cataluminescence ether gas sensor based on GO/Mo2TiC2Tx at low working temperature

Abstract

A cataluminescence (CTL) ether gas sensor based on GO/Mo2TiC2Tx composite was developed. The sensor has high selectivity and sensitivity to ether with the response and recovery times of 2 and 8 s, respectively. The optimal operating temperature (155 °C) is low compare with common sensors. Under optimal conditions, the linear range of the concentrations of ether is 9.5–950 ppm; CTL signal intensity and ether concentration show a good linear relationship (r = 0.9952); and the detection limit is 0.64 ppm. Furthermore, no response to anything other than acetone after repeatedly tested 10 kinds of common volatile organic compounds, which shows that the sensor has a good selectivity. In addition, the developed sensor has a long life.

Graphical abstract: A fast response cataluminescence ether gas sensor based on GO/Mo2TiC2Tx at low working temperature

Article information

Article type
Paper
Submitted
25 Dec 2021
Accepted
02 Mar 2022
First published
16 Mar 2022
This article is Open Access
Creative Commons BY license

RSC Adv., 2022,12, 8361-8367

A fast response cataluminescence ether gas sensor based on GO/Mo2TiC2Tx at low working temperature

F. Pan, B. Sun, Z. Tang and S. Zhu, RSC Adv., 2022, 12, 8361 DOI: 10.1039/D1RA09356H

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements