Laura M.
Dornan
a,
Qun
Cao
a,
James C. A.
Flanagan§
a,
James J.
Crawford¶
b,
Matthew J.
Cook
*a and
Mark J.
Muldoon
*a
aSchool of Chemistry and Chemical Engineering, Queen's University Belfast, David Keir Building, Stranmillis Road, Belfast, BT9 5AG, UK. E-mail: m.j.muldoon@qub.ac.uk; m.cook@qub.ac.uk
bDepartment of Medicinal Chemistry, AstraZeneca R & D, Charnwood, Bakewell Rd, Loughborough, LE11 5RH, UK
First published on 23rd May 2013
Copper/TEMPO catalysts can be used to prepare nitriles from aldehydes or alcohols using aqueous ammonia. Readily accessible methods were developed that enable standard glassware to be used with air as the source of O2. It was further shown that, at higher temperatures in a pressurised reactor under limiting oxygen conditions (8% O2), catalyst loadings of 1 mol% could be employed.
There is a need to develop chemoselective oxidation catalysts that can be utilised by the pharmaceutical industry.9 To have catalytic oxidation reactions carried out on scale, it would help if these methods were first adopted by synthetic chemists working at the early stages of R&D. Therefore we believe that it is important that methods are developed that are readily accessible and safe. We wanted to develop a method that did not specifically require specialist high pressure reactors. Additionally, we did not want to employ a pure O2 atmosphere. The use of pure O2 is quite common in the aerobic catalysis literature, but it is a dangerous approach and it is a barrier to such catalysts being widely adopted. We aimed to develop a safe, practical and scalable method. Herein, we report for the first time the use of the Cu–TEMPO–air catalytic system for the oxidation of aldehydes or alcohols to a range of nitriles.10–12As shown in Scheme 1, this catalyst system consists of a Cu salt complexed with a ligand such as 2,2-bipyridine (bipy), a stable free radical such as TEMPO (2,2,6,6-tetramethylpiperidinyloxy), and dioxygen (from air) as the terminal oxidant.
Scheme 1 Synthesis of nitriles using Cu/TEMPO. |
The catalyst has been well studied for the aerobic oxidation of alcohols to aldehydes, and we were attracted to this catalyst system as it possesses a number of attributes that make it very desirable.13,14 It utilises an inexpensive, abundant metal of low toxicity. It can operate under mild conditions, demonstrates high chemoselectivity and is tolerant of a wide range of functional groups and heteroatoms. The use of this catalyst for the oxidation of alcohols to aldehydes is well established13,14 therefore we have mainly focused on examining its new application; the synthesis of nitriles from aldehydes. Some initial optimisation experiments are shown in Table 1. It was found that Cu(OTf)2 was the most active catalyst and was able to afford a high isolated yield of benzonitrile at 25 °C. Cu(OTf)2 was therefore selected as the choice of Cu(II) species when studying a wider range of substrates (Table 2). The “open flask” approach means that continual addition of NH3(aq) is required to replace NH3 that evaporates over time. However, if the concentration of NH3 is too high it slows down the rate of the reaction. Reactions were faster when NaOH was added, however still proceeded readily in its absence.
Once the optimisation had been performed, we examined the substrate scope. As Table 2 demonstrates, good to excellent yields can be obtained for a range of substrates. We have obtained isolated yields for all the products reported in Table 2, although in some cases we have also reported yields determined by GC. In these cases, we attribute the discrepancy in yields to the volatility of the products which led to some loss of the mass balance during product isolation. The reaction is tolerant of a wide range of aromatic functional groups including aryl halides (1b–d), nitro groups (1e–f), electron donating groups such as methoxy (1g) and enals such as cinnamaldehyde (1h).
The catalyst is also tolerant of molecules containing heteroatoms such as oxygen, sulfur and nitrogen. In the case of the case of 1j and 1l, the nitrile was obtained in good yield, but small quantities of the corresponding primary amide were also obtained. In these cases, if reaction times were prolonged, the nitrile was converted slowly to the amide under the reaction conditions. Mizuno and co-workers reported that primary amides could be produced selectively from oxidation of alcohols or aldehydes in the presence of aqueous ammonia using a heterogeneous Mn catalyst.15 For the majority of substrates, the Cu–TEMPO system is selective to nitriles and amide by-products were not observed.
As some of these substrates were slow to react at room temperature, this led us to explore the temperature limits of this open flask approach. Therefore, in some cases, in order to reduce the reaction times we employed temperatures of 40 or 70 °C.16 Above 70 °C the rate of NH3 evaporation is too great and very little product is obtained. With regards to the choice of radical, although TEMPO (4a) is an effective co-catalyst, we found it difficult to separate from many of the nitrile products using chromatography. In contrast, 4-hydroxy-TEMPO (4b) could be more readily separated from the product. In most cases we utilised 4-sulfonatooxy-TEMPO (4c),16,17 as this derivative can be easily separated from the product by aqueous extraction, allowing many of the pure products to be isolated without the need for chromatography. Furthermore, 4c was found to be more thermally stable than 4b.
As discussed earlier, initial optimisation was carried out at 25 °C, however we later re-examined the use of CuCl2. We found that the use of this less expensive salt becomes viable at higher temperatures. For example, we were able to obtain an 88% isolated yield of the nitrile from 4-chlorobenzaldehyde with the open air method at 70 °C. If these reactions were scaled up, it would likely be carried out in a pressurised system, utilising limiting oxygen concentrations (LOC), to avoid explosive gas mixtures. The use of reactors has the advantage that higher temperatures can be used as evaporation of ammonia is no longer an issue. Some preliminary tests indicate that at higher temperatures (e.g. 120 °C) in a pressurised reactor (with 40 bar of 8% O2 in N2), not only can CuCl2 be utilised but the loading of CuCl2 and 4c can be reduced to 1 mol%. Under these conditions we could obtain 83% isolated yield using 4-chlorobenzaldehyde. Such low catalyst loadings demonstrate the excellent potential for the industrial utilisation of this catalyst system. The results compare favourably to other catalytic methods. For example, the recent work by Mizuno and co-workers, required 10 mol% of ruthenium hydroxide on alumina at 120 °C.7a
In the case of aliphatic aldehydes, we found that we had a problem with undesired, uncatalysed side reactions. It is known that such aldehydes can react with ammonia and produce a range of products via aldol type reactions.18,19 We found that such substrates could be converted successfully if we modified our method. Side reactions were reduced by removing NaOH from the system. As might be expected, aliphatic substrates are less reactive than their aromatic counterparts, therefore we employed [Cu(MeCN)4][OTf] and acetonitrile, rather than an acetonitrile–water mixture. Previously Stahl and co-workers discovered that the reactivity of Cu/TEMPO is increased when Cu(I) salts are employed under such conditions.14e,g The improved reactivity is not sustained in aqueous solvent mixtures, therefore we could not continually add ammonia as we had previously. Consequently we added just 2.5 equivalents of NH3 (to ensure low levels of water) and instead of an “open flask” we attached a balloon containing air to our condenser. The conditions are summarised in eqn (1). At a temperature of 25 °C we could obtain octanenitrile (2m) from octanal (1m) in a quantitive yield (determined by GC using nonane as standard). Additionally, starting from the alcohol (1n) we could obtain a quantitive yield of octanenitrile when a temperature of 50 °C was used. As might be expected, this Cu(I) approach also allows benzylic nitriles to be prepared directly from their corresponding alcohols.
(1) |
Although not fully optimised, it was once again found that such aliphatic substrates could be converted with lower catalyst loadings when the reactions were carried out in a reactor.
In summary, we have shown that copper/TEMPO can be used to prepare nitriles from aldehydes or alcohols using aqueous ammonia with air as the oxidant. The use of standard glassware along with air means that these methods offer a safe and readily accessible approach to making nitriles using an aerobic catalyst.
We thank the Nuffield Foundation and the Department of Education in Northern Ireland for funding.
Footnotes |
† Dedicated to Professor David J. Cole-Hamilton on the occasion of his retirement and for his outstanding contributions to transition metal catalysis. |
‡ Electronic supplementary information (ESI) available: Further details of experimental procedures and 1H and 13C NMR spectra. See DOI: 10.1039/c3cc42231c |
§ Current address: Department of Chemistry, Stanford University, Stanford, CA 94305, USA. |
¶ Current address: Genentech, Inc., 1 DNA Way, South San Francisco, CA 94080, USA. |
This journal is © The Royal Society of Chemistry 2013 |