Jiang
Peng
,
Xinyan
Guo
,
Xinpeng
Jiang
,
Dahui
Zhao
* and
Yuguo
Ma
*
Beijing National Laboratory for Molecular Sciences, Centre for Soft Matter Science and Engineering, Key Lab of Polymer Chemistry & Physics of the Ministry of Education, College of Chemistry, Peking University, Beijing 100871, China. E-mail: ygma@pku.edu.cn; dhzhao@pku.edu.cn; Fax: +86-10-62751708
First published on 9th November 2015
Heavy-atom-free triplet photosensitizers are developed by harnessing the thermally active triplet state of carbazolyl dicyanobenzene (CDCB) derivatives and applied to realize visible-to-ultraviolet photon upconversion (UC) via triplet–triplet annihilation (TTA). Demonstrating an annihilator-appending strategy, the designed sensitizers effectively realize TTA UC in polyurethane films with 2,7-di-tert-butylpyrene (DBP) as the annihilator/emitter. The covalently tethered DBP to CDCB is proven critical for achieving the superior sensitizing and UC performance in the solid matrix, essentially by suppressing the reverse ISC and more effectively transferring triplet excitons to free emitters.
By virtue of the prominent advantage of utilizing a non-coherent, low-power (mW cm−2) light source,4 TTA UC is envisioned to have a plethora of potential applications, such as solar energy conversion,8 white light emission,9 photocatalysis,10 and bioimaging.11 Ever since Parker and Hatchard first discovered the phenomenon of TTA UC in the 1960s,12 various sensitizer and emitter pairs have been shown to be capable of establishing TTA UC in solution.13 Yet, achieving this as an efficient process in the solid state still remains a challenging goal, especially to realize practical applications of this technique, considering the ease of device fabrication and processing with solid materials.14–16 The main obstacle lies in the fact that in solid hosts the molecular mobility is severely restricted and molecular collisions are greatly suppressed, but the triplet sensitization step in TTA UC sensitively relies on such collisional interactions. Consequently, most previously studied solid-state TTA UC systems employed relatively high doping concentrations of emitters and fairly expensive metal-containing sensitizers such as octaethyl porphyrins and ruthenium(II) complexes with long triplet lifetimes.17 Most recently, Baldo et al. reported a solid-state upconversion system sensitized by a TADF dye.18 Here, to demonstrate the high competency of our metal-free sensitizing system, we show that efficient TTA UC can be achieved with these newly designed sensitizers even in a diffusion-limited polymer matrix.
We first selected a pair of TADF molecules (4CzPN and 4CzIPN, Chart 1) derived from carbazolyl dicyanobenzene (CDCB) developed by Adachi et al.6a to examine their triplet sensitizing ability. Our TTA UC experiments show that both 4CzPN and 4CzIPN are reasonably good photosensitizers in solution, as evidenced by the clearly detectable upconverted emission from DBP (2,7-di-tert-butylpyrene) upon mixing with 4CzPN or 4CzIPN in toluene (Fig. S6†). An UC quantum yield of 4.4% is reached with 4CzPN.
Nonetheless, the rapid reverse ISC (T1 to S1) and resultant TADF inevitably presents significant competition to the intermolecular triplet–triplet energy transfer (TTET) between the sensitizer (4CzPN/4CzIPN) and emitter (DBP), particularly under the diffusion limited conditions. Consequently, in the PU matrix, a much less desirable sensitizing performance is observed with 4CzPN and 4CzIPN, rendering hardly detectable UC emission. To improve the intermolecular TTET efficiency in PU films, we then designed three new molecules, which incorporated various numbers of DBP units covalently tethered to 4CzPN via ethylene linkers (Chart 1).19 These covalently linked DBP are expected to serve as triplet energy acceptors and enable intramolecular TTET, which can effectively compete with the reverse ISC and suppress TADF, thereby favoring the sensitizing process and TTA UC.
Fig. 1 UV-vis absorption spectra (solid) in CH2Cl2 and normalized photoluminescence spectra (dotted) in toluene (5 μM, excited at 380 nm). |
λ em [nm] | τ em | τ T [μs] | Φ em [N2/air] | |
---|---|---|---|---|
a Data are measured in deaerated toluene at room temperature. b Emission maximum wavelength. c Photoluminescence lifetimes. d Excited state lifetimes measured using nanosecond transient absorption. e Photoluminescence quantum yields measured in N2- or air-saturated toluene at room temperature using [Ru(bpy)3]Cl2 as the standard.20 f Averaged lifetimes from fitting bi-exponential decays (see Fig. S2 and S4†). | ||||
4CzIPN | 501 | 14 ns (22%)/4.5 μs (78%) | — | 0.87/0.26 |
4CzPN | 523 | 11 ns (17%)/11.6 μs (83%) | 8.7 | 0.74/0.13 |
4CzPN–1DBP | 530 | 17 ns | 263 | 0.22/0.17 |
4CzPN–2DBP | 536 | 23 ns | 281 | 0.31/0.24 |
4CzPN–8DBP | 538 | 9 nsf | 365f | 0.10/0.09 |
To further prove the appearance of triplet [DBP] in 4CzPN–nDBP, transient absorption spectroscopy (TAS) measurements were conducted. By selectively exciting the [4CzPN] unit with a 410 nm laser, characteristic absorption of 3[DBP] is detected, while the ground-state [DBP] is significantly bleached (Fig. S3†). The TAS-measured excited-state lifetimes of 4CzPN–nDBP are all above 200 μs, much longer than that of 4CzPN (Table 1). These results are consistent with the occurrence of an intramolecular triplet energy transfer process. Moreover, phosphorescence from 3[DBP] can be observed upon exciting 4CzPN–1DBP at 410 nm and 77 K in glassy 2-methyltetrahydrofuran (MeTHF) with a pulsed xenon lamp (Fig. S5†). This observation indicates that the triplet exciton can be transferred intramolecularly from [4CzPN] to [DBP] in the solid matrix at lowered temperature.
We then tested the sensitizing abilities of 4CzPN–nDBP. Evident UC emissions were detected from deaerated toluene solutions of all three bichromophoric sensitizers in the presence of free DBP (Fig. 2). The UC quantum yields (ΦUC) of the systems sensitized by 4CzPN–1DBP, 4CzPN–2DBP and 4CzPN–8DBP (at 10 μM) were measured to be 3.7%, 2.7% and 1.7%, respectively. The slightly lowered ΦUC of 4CzPN–1DBP compared to that of 4CzPN (4.4%) in solution suggests that, although the intramolecular triplet energy transfer to [DBP] effectively suppresses the reverse ISC and TADF, the triplet excitons received by tethered [DBP] are not efficiently passed on to the free emitters. We suspect that the excitons are likely lost through nonradiative decays. It was also noticed that as the number of linked [DBP] increased, the ΦUC value further decreased.
Fig. 2 UC emission spectra of DBP (200 μM) in the presence of the studied photosensitizers (10 μM) in deaerated toluene. |
In contrast to the solution-phase experiments, completely different results are obtained in the solid host. The DBP-appended sensitizers vastly outperform the non-functionalized CDCBs and accomplish much more efficient TTA UC in PU films. In these experiments, the non-coherent excitation light (∼7 mW cm−2) is provided by a 150 W Xe lamp, passing through a 450 ± 2.5 nm monochromator followed by a 400 nm long-pass filter to remove any high-energy photons. A short-pass filter (cut-off at ∼410 nm) was installed between the film and detector to remove the scattering light and residual fluorescence from the sensitizers. The UC emission spectra are shown in Fig. 3A and averaged data from three parallel experiments are summarized in Fig. 3B. All PU films containing sensitizer 4CzPN–nDBP co-doped with emitter DBP are observed to generate strong UC emissions. Evident UC signals can be detected from the PU films when the effective concentrations of 4CzPN–nDBP and emitter (free DBP) were merely 5 and 50 μmol g−1, respectively. In contrast, the UC emissions from 4CzPN and 4CzIPN-sensitized films are very weak under the same conditions. Among the three [DBP]-functionalized molecules, 4CzPN–1DBP exhibits the best performance. The average UC emission intensity from 4CzPN–1DBP-sensitized films is about 80 times that from 4CzPN-doped films. These results clearly demonstrate that covalently linking a [DBP] group to a CDCB molecule can significantly enhance the TTA UC efficiency in PU films, implying that the tethered [DBP] brings about a more efficient intermolecular TTET from the sensitizer to free DBP. The experiments also reveal that attaching more than one [DBP] unit to 4CzPN does not further improve the UC efficiency, but instead is harmful to the sensitizer performance (Fig. 3), likely due to the self-quenching effect among the [DBP] units in the same molecule. Such observations are also consistent with the previous observation that one [DBP] is sufficient to completely shut down TADF in 4CzPN (Table 1). Furthermore, the UC performance of the metal-free system in PU films was also compared to a metal–complex sensitizer, Ir(ppy)3. At the same sensitizer and emitter concentrations, a very weak UC signal is detected from films doped with the metal complex and DBP (Fig. 3).
To prove that the observed UC emissions in toluene and the polymer matrix are truly generated via a TTA process, a quadratic dependence of the emission intensity on the excitation power is necessarily tested. For the sensitizer and emitter pair of 4CzPN–1DBP/DBP, the dependence of UC emission intensity on the incident light power was examined. As shown in Fig. 4, when the integrated intensity of the UC fluorescence from DBP is plotted against the transmittance percentage of the neutral density filter at 450 nm on a double-logarithmic scale,21 linear correlations with a slope close to 2 are observed for both solution and solid matrix, confirming the two-photon essence of the UC signals.22
To further confirm that intramolecular TTET has taken place with 4CzPN–nDBP dispersed in the polymer matrix, we then collected the time-resolved photoluminescence decay curves of the metal-free sensitizers dispersed in the PU films (Fig. 5). Long-lifetime TADF is clearly observable with 4CzPN and 4CzIPN, whereas the delayed fluorescence is nearly completely quenched in the case of 4CzPN–nDBP, supporting the conclusion that, for 4CzPN–nDBP in PU films, the triplet excitons generated by [4CzPN] are transferred to the tethered [DBP] unit highly efficiently.
Fig. 5 Prompt (A) and delayed (B) fluorescence decay profiles of five photosensitizers doped in PU films at 5 μmol g−1 (IRF refers to instrument response function). |
In essence, the above experimental results indicate that an effective intramolecular triplet energy transfer is established from [4CzPN] to [DBP] upon covalently ligating the two moieties together. Such an energy transfer pathway successfully suppresses the reverse ISC and TADF by competing for triplet excitons (Fig. 6). More importantly, this process plays a very critical role in achieving TTA UC in the solid matrix. Unlike in solution, the intermolecular TTET is significantly hampered in the diffusion-limited solid matrix. Consequently, the intermolecular TTET from 4CzPN to free DBP is nearly disabled, yielding the reverse ISC and TADF.
However, for 4CzPN–1DBP, the in situ generated 4CzPN–3[DBP] with a long lifetime allows the intermolecular TTET and subsequently TTA UC to proceed, rendering enhanced UC efficiency in PU films. An important note is that the nonradiative decay of 4CzPN–3[DBP] appears to be considerably slowed down in PU films compared to in solution.
Footnote |
† Electronic supplementary information (ESI) available: Synthetic procedures and characterization data. CCDC 1400097. For ESI and crystallographic data in CIF or other electronic format see DOI: 10.1039/c5sc03245h |
This journal is © The Royal Society of Chemistry 2016 |