J.
Esselborn
a,
N.
Muraki‡
b,
K.
Klein
c,
V.
Engelbrecht
a,
N.
Metzler-Nolte
c,
U.-P.
Apfel
*c,
E.
Hofmann
d,
G.
Kurisu
*b and
T.
Happe
*a
aAG Photobiotechnologie, Fakultät für Biologie und Biotechnologie, Ruhr-Universität Bochum, Universitätsstraße 150, 44801 Bochum, Germany. E-mail: thomas.happe@rub.de
bLaboratory of Protein Crystallography, Institute for Protein Research, Osaka University, Suita, Osaka 565-0871, Japan. E-mail: gkurisu@protein.Osaka-u.ac
cLehrstuhl für Anorganische Chemie I—Bioanorganische Chemie, Fakultät für Chemie und Biochemie, Ruhr-Universität Bochum, Universitätsstraße 150, 44801 Bochum, Germany. E-mail: ulf.apfel@rub.de
dAG Proteinkristallographie, Fakultät für Biologie und Biotechnologie, Ruhr-Universität Bochum, Universitätsstraße 150, 44801 Bochum, Germany
First published on 26th October 2015
[FeFe]-hydrogenases are nature's fastest catalysts for the evolution or oxidation of hydrogen. Numerous synthetic model complexes for the [2Fe] subcluster (2FeH) of their active site are known, but so far none of these could compete with the enzymes. The complex Fe2[μ-(SCH2)2X](CN)2(CO)42− with X = NH was shown to integrate into the apo-form of [FeFe]-hydrogenases to yield a fully active enzyme. Here we report the first crystal structures of the apo-form of the bacterial [FeFe]-hydrogenase CpI from Clostridium pasteurianum at 1.60 Å and the active semisynthetic enzyme, CpIADT, at 1.63 Å. The structures illustrate the significant changes in ligand coordination upon integration and activation of the [2Fe] complex. These changes are induced by a rigid 2FeH cavity as revealed by the structure of apoCpI, which is remarkably similar to CpIADT. Additionally we present the high resolution crystal structures of the semisynthetic bacterial [FeFe]-hydrogenases CpIPDT (X = CH2), CpIODT (X = O) and CpISDT (X = S) with changes in the headgroup of the dithiolate bridge in the 2FeH cofactor. The structures of these inactive enzymes demonstrate that the 2FeH-subcluster and its protein environment remain largely unchanged when compared to the active enzyme CpIADT. As the active site shows an open coordination site in all structures, the absence of catalytic activity is probably not caused by steric obstruction. This demonstrates that the chemical properties of the dithiolate bridge are essential for enzyme activity.
In nature, the 4FeH-cluster and other FeS clusters of the enzyme not specific to [FeFe]-hydrogenases are synthesized by the widespread ISC or SUF systems for FeS cluster synthesis yielding inactive hydrogenases, which lack only the specific 2FeH-subcluster.24 For the sake of simplicity this pre-form will be referred to as apo-form of [FeFe]-hydrogenases throughout this text. The three maturase enzymes HydE, HydF and HydG are necessary for the synthesis of the 2FeH-cluster and the assembly of the H-cluster within the protein.25In vitro, chemically synthesized [2Fe] complexes can be bound to the maturase HydF and transferred from there to apo-hydrogenases to form a complete H-cluster.2 Notably, also in the absence of HydF or any other helper protein, an active H-cluster can be formed spontaneously by bringing together the inactive apo-hydrogenase and the chemically synthesized [2Fe] complex Fe2[μ-(SCH2)2NH](CN)2(CO)42−.26 While the [2Fe] moiety alone is inactive under physiological conditions, the semisynthetic enzyme shows high catalytic activity, which demonstrates the importance of the protein environment. [2Fe] complexes with variations in the dithiolato bridge and/or the other Fe ligands have recently been shown to integrate into HydA1 as well, but the enzymes were inactive or severely limited in their turnover rates especially if the dithiolato bridge was changed.2,27 The central atom of the dithiolato-moiety seems to influence the redox behavior of the H-cluster either directly or by interfering with the proton transfer to/from the active site.28
Structures of the active bacterial [FeFe]-hydrogenases3,29,30 and the inactive apo-form of HydA1 from Chlamydomonas reinhardtii31 have been solved at high resolution. In this study we aim to expand the knowledge about maturation of [FeFe]-hydrogenases by reporting the crystal structure of the [FeFe]-hydrogenase from Clostridium pasteurianum (CpI) in its apo-form without the 2FeH-cluster (apoCpI). In addition, we contribute to a deeper understanding of [FeFe]-hydrogenase function by solving the structures of four semisynthetic hydrogenases maturated in vitro with [2Fe] complexes of the kind Fe2[μ-(SCH2)2X](CN)2(CO)42−: fully active CpIADT (X = NH) and its non-active derivatives CpIPDT (X = CH2), CpIODT (X = O) and CpISDT (X = S).
All forms of CpI were crystallized under strictly anaerobic conditions and the crystal structures of both CpIADT and apoCpI were solved with molecular replacement using the known structure of active, native CpI3,30 as a search model and refined to 1.63 Å and 1.60 Å resolution respectively (Fig. 1, Table 1). CpIADT was subsequently used as a search model during molecular replacement to determine the structures of CpIPDT, CpIODT and CpISDT at 1.82 Å, 1.73 Å and 1.93 Å resolution respectively (Fig. 1, Table 1). In contrast to already known structures of native CpI,3,30,39 the space group of the crystals was P21 for all five enzymes and the asymmetric units each contained two nearly identical molecules. Of these two molecules, one possesses a more flexible N-terminal domain (residues 1–90), but at the same time a more rigid active site and thus yields a more reliable electron density in the important H-domain in all structures. This becomes evident through the slightly lower temperature factors around the active site when compared to the second molecule. Accordingly figures and values given in the text were taken from the former molecule (chain B) if not stated otherwise, while the complete values for both chains of all structures can be found in the ESI.†
apoCpI | CpIADT | CpIPDT | CpIODT | CpISDT | |
---|---|---|---|---|---|
a Numbers in parenthesis represent values for the highest resolution bin. b Correlation coefficient CC (1/2) as defined in Karplus and Diederichs 2012.55 | |||||
A. Crystallographic data | |||||
X-ray source | SPring8-BL44XU | SLS-PXII | SLS-PXII | SLS-PXII | SLS-PXII |
Space group | P21 | P21 | P21 | P21 | P21 |
Unit-cell parameters | |||||
a (Å) | 90.06 | 91.34 | 87.47 | 89.66 | 89.83 |
b (Å) | 71.81 | 73.65 | 72.07 | 72.45 | 73.13 |
c (Å) | 103.31 | 103.88 | 102.71 | 102.94 | 103.04 |
Wavelength (Å) | 0.900 | 0.978 | 0.979 | 0.979 | 0.979 |
Resolution range (Å) | 50.00–1.60 | 48.365–1.63 | 47.58–1.82 | 47.77–1.73 | 48.03–1.93 |
(1.63–1.60)a | (1.67–1.63) | (1.87–1.82) | (1.77–1.73) | (1.98–1.93) | |
Total reflections | 645133 (31520) | 3729315 (129491) | 760236 (56288) | 929911 (70575) | 674928 (47804) |
Unique reflections | 172056 (8519) | 170277 (12470) | 112496 (8270) | 136702 (10132) | 99824 (7353) |
Completeness (%) | 99.7% (99.5%) | 99.9% (99.7%) | 99.9% (100.0%) | 100.0% (100.0%) | 99.9% (99.9%) |
R meas (%) | 5.2% (56.5%) | 8.7% (109.1%) | 14.3% (98.8%) | 8.7% (83.1%) | 15.8% (93.6%) |
I/σ(I) | 36.8 (3.2) | 20.6 (2.2) | 9.6 (2.0) | 14.1 (2.1) | 9.9 (2.1) |
Correlation coefficient (CC 1/2)b | — (—) | 99.9 (87.1) | 99.7 (77.9) | 99.9 (84.1) | 99.6 (68.8) |
B. Refinement statistics | |||||
PDB code | 4XDD | 4XDC | 5BYR | 5BYQ | 5BYS |
Resolution (Å) | 1.60 | 1.63 | 1.82 | 1.73 | 1.93 |
R work | 0.14 | 0.15 | 0.16 | 0.15 | 0.16 |
R free | 0.17 | 0.18 | 0.19 | 0.18 | 0.19 |
No. atoms (except H) | 10548 | 10385 | 9859 | 9978 | 9991 |
Protein | 9050 | 9047 | 8893 | 8982 | 8903 |
Ligand | 72 | 106 | 106 | 106 | 106 |
Solvent/ion | 1426 | 1232 | 860 | 890 | 982 |
RMSD from ideal | |||||
Bond lengths (Å) | 0.006 | 0.013 | 0.018 | 0.009 | 0.014 |
Bond angles (°) | 0.95 | 1.28 | 1.48 | 1.07 | 1.28 |
Ramachandran plot | |||||
Most favored (%) | 97.67 | 96.90 | 96.32 | 97.23 | 96.59 |
Additionally allowed (%) | 2.33 | 3.02 | 3.68 | 2.77 | 3.41 |
Outliers (%) | 0.00 | 0.09 | 0.00 | 0.00 | 0.00 |
B factors | |||||
Overall | 35.0 | 39.0 | 32.0 | 35.0 | 32.0 |
2FeH cavity (chain A/chain B) | 19.5/22.7 | 24.5/22.0 | 19.0/16.8 | 22.3/19.3 | 18.6/17.3 |
2FeH (chain A/chain B) | —/— | 23.3/20.7 | 19.3/17.6 | 23.1/20.2 | 18.5/17.3 |
Average occupancy of 2FeH (chain A/chain B) | —/— | 0.98/0.95 | 0.94/0.96 | 0.93/0.96 | 0.98/0.97 |
As in vitro maturation of apo-[FeFe]-hydrogenases with synthetic [2Fe] cofactors was described only recently,2,26 we considered the exact structure of the 2FeH-cluster and its environment in the semisynthetic enzyme to be of considerable interest. To minimize model bias of electron density in the active site cavity before starting to refine the 2FeH-subcluster, at least two rounds of refinement of each structure were performed without a 2FeH-cluster in the models.
Subsequently, starting models of the 2FeH-subcluster based on the structure of native CpI30 with optimized geometry but adapted composition of the dithiolato moiety,5 were used. Restraints were applied to all bond distances in the subcluster. We additionally restrained the angles defining the positions of the CO and CN− ligands. The position of the bridging CO was not restrained due to its reported flexibility5 depending on the redox state of the enzyme. Final models of the 2FeH-subclusters were verified by inspection of composite omit maps.
Fig. 2 The central cavity of apoCpI and CpIADT. Stereo view of a stick model of the central cavity of apoCpI (carbon atoms in cyan) with Fo − Fc simulated annealing omit map contoured at 4σ in the identical orientation as Fig. 3. A stick model of amino acids lining the central cavity of CpIADT is superposed (carbon atoms in marine). Numbering of amino acids as in the structure of native CpI. Small spheres indicate water atoms (red) and chloride ion (cyan) not present in CpIADT. |
The structure of apoCpI presented here shows the three regions 405–423 (“plug”), 437–453 (“lid”) and 529–540 (“lock”) clearly in a “closed” conformation nearly identical to active CpI (Fig. 1). Prominently, F417 in direct contact to the 2FeH-subcluster shows minimal deviation in apoCpI when compared to CpIADT (Fig. 2), while it is moved by 15 Å in apoHydA1. Washed and subsequently dissolved crystals of apoCpI could be maturated with the synthetic ADT-bridged [2Fe] cluster to an activity of 1250 nmol H2/min/crystal, reassuring that the reported closed structure of apoCpI is not a dead-end conformation. This suggests an equilibrium between a “closed” and an “open” state in apoCpI, of which only the former readily crystallizes. Within the regions with striking deviation between apoHydA1 and apoCpI, several glycine residues can be identified, which are highly conserved in a recent sequence alignment of all known [FeFe]-hydrogenase sequences40 (Table S2†). These amino acids could function as hinges, as for some of them the “open” or “closed” conformation respectively would imply dihedral angle combinations commonly found only for glycine residues41 (Table S2†). Their high degree of conservation thus is another hint that an open and closed form of all [FeFe]-hydrogenases exists.
Fig. 3 Comparison of the active site of CpIADT and native CpI. Stick model of the environment of the 2FeH-subcluster of CpIADT (carbon atoms in marine) superposed to a stick model of native CpI (PDB ID 3C8Y)30 (carbon atoms in magenta). Dashed lines indicate potential interactions between 2FeH and the protein listed in Table S4.† Numbering of amino acids as in the structure of native CpI. |
When comparing the important cofactor–peptide interactions in native CpI and the structure of CpIADT, the distances between the atoms of 2FeH and their respective interaction partners in the protein environment show a maximum deviation of 0.17/0.13 Å and an average deviation of 0.06/0.05 Å for chain A/chain B (Fig. 3, Table S4†). This is well within the experimental error of crystal structure analysis at the given resolution. Moreover the synthetic 2FeH-cluster itself in the structure of CpIADT compares very well to the in vivo synthesized version in native CpI30 (Fig. 3) and the [FeFe]-hydrogenases DdH29 and HydA1 (data from XANES/EXAFS)42 within the error of crystal structures of macromolecules (Table S5†). This finding confirms data from FTIR and EPR spectroscopic studies, which showed excellent agreement of native and semisynthetic protein for the small [FeFe]-hydrogenase HydA1 from Chlamydomonas reinhardtii.26,28 For [FeFe]-hydrogenases with additional N-terminal domains like CpI or DdH, a bridging conformation of one CO ligand is assumed to occur only in the Hox or CO inhibited state.5,21,29 In our structure the CO ligand between the Fe atoms is positioned at an angle of 114°/132° (chain A/chain B) between Fed–C–O (Table S5,†Fig. 4), which does not indicate terminal binding of the CO to Fed as previously published for a structure of reduced DdH.5 Thus we understand the here reported structure of CpIADT to be mainly in the Hox state. While in earlier structures of CpI3,30 a region of low but significant electron density next to Fed was assigned as a water molecule in this particular redox state, in the structure described here the H-cluster of both chains clearly features one coordination site on Fed devoid of electron density (Fig. 4).
Fig. 4 Structure of semisynthetic H-cluster and structural changes in ligand coordination upon integration of 2FeH. (A) Stick model of the H-cluster of CpIADT colored according to element with Fo − Fc simulated annealing omit map contoured at 3.5σ. (B) Stick model of the crystal structure of Fe2[μ-(SCH2)2NH](CN)2(CO)42− (ref. 37). The planes in A and B are drawn through the sulfur atoms of the [2Fe] complexes and one of the two Fe atoms each to clarify the coordination geometry of the Fe ligands. |
A comparison of the crystal structures of the synthetic ADT-bridged [2Fe] complex37 before and after integration into the protein environment as 2FeH illustrates the distortions that the protein forces upon the [2Fe] complex (Fig. 4). An Fe–S–Fe bridge to the 4FeH-cluster is formed and, as demonstrated earlier, one CO ligand is lost during the process of activation.26 Another CO ligand shifts into a bridging position between the two Fe atoms and the CO/CN− ligands move into an octahedral coordination at each Fe with nearly perpendicular equatorial planes (Fig. 4). This conformation has been attributed a crucial role in allowing the mixed Fe(I)–Fe(II) valency of the Hox state within the catalytic cycle, which is difficult to achieve in isolated [2Fe] clusters.43 Additionally the new conformation features the open coordination site at Fedtrans to the bridging CO (Fig. 4). This promotes regioselectivity of H2 binding or hydride formation close to the amine in the ADT-bridge, which is believed to be crucial for the mechanism.16,44
Fig. 5 Comparison of the catalytically important amino acids in CpI derivatives. Stick models of the potential proton transfer pathway (A) and the environment of the 2FeH-subcluster (B) of CpIADT (carbon atoms in marine) superposed to stick models of CpIPDT (magenta), CpIODT (green) and CpISDT (yellow). Dashed lines indicate potential proton transfer interactions or potential interactions of 2FeH with the protein as listed in Table S4.† Numbering of amino acids as in the structure of native CpI. |
For the ODT-bridged 2FeH-subsite in HydA1 a less pronounced bridging character of COb compared to other semisynthetic HydA1 enzymes was reported according to FTIR data of the “as isolated” state.27 A very similar state represented a minor part of the mixed population of HydA1 with SDT-bridged 2FeH-subcluster in the same study. We found an angle of 145° between Fed–C–O of the COb ligand in CpISDT which indicates a more terminal than bridging character, but the other structures including CpIODT reveal angles suggesting a bridging CO (Fig. 6, Table S5†).
Because of the above discussed effects of redox state changes on the COb ligand, a potential dependent FTIR based investigation of the CpI enzyme derivatives would be needed to clarify if this is merely an effect of the redox state at the point of crystal mounting or inherent to the different dithiolato bridge. A detailed comparison of distances between the atoms of the 2FeH subsite and the surrounding amino acids indicates a slightly different position of Fed within the cavity for CpIPDT 0.1 Å closer to Ala 230 and further away from Cys 299 (Table S4†). Besides this, small differences in the dithiolato bridge can be observed. While the bridgehead atom is leaning about 0.2 Å further away from Met 497 in the inactive CpI derivatives, the sulfur atom of Cys 299 is pushed back to keep roughly the van-der-Waals distance to the bridgehead atom of the dithiolato bridge in the three structures (Fig. 5B, Table S3†). However, the position and geometry of the non-natural 2FeH-clusters do not show any large differences (Fig. 5 and 6, Table S5†) when compared to native CpI or CpIADT and thus do not offer a clear structural explanation for the impaired activity.
For CpIPDT this is in line with a recent ENDOR and HYSCORE study of HydA1 containing a PDT-bridged 2FeH-subcluster, which showed very similar spectra in comparison to in vivo maturated DdH.45 DFT calculations performed for ADT-bridged, PDT-bridged and ODT-bridged 2FeH-subclusters in CpI also resulted in very similar geometries30 (Table S5†). Remarkably, there is no significant electron density in our structures close to Fed at the postulated site of H2 binding in any of the 2FeH-subclusters (Fig. 6). Thus binding of an inhibitor to this open coordination site can be ruled out as cause for the quantitative loss of activity. For HydA1 with the PDT-bridged 2FeH cluster no binding of CO to the active site was observed in a recent FTIR based study.28 Our structure of CpIPDT rules out a rearrangement in the neighboring amino acids as explanation for this behavior. However, once an inhibitory CO is bound to Fed, the distance between the central atom of the dithiolate bridge and the oxygen of CO was reported to be as close as ∼2.5 Å.5 While the single hydrogen of an amine bridgehead proposedly points towards C299 and thus away from Fed, the PDT's central methyl group might considerably obstruct binding of CO to Fed through its hydrogen atoms not visible in X-ray crystallography at the given resolution.
[Fe2[μ-(SCH2)2NH](CN)2(CO)4][Et4N]2 was synthesized as reported earlier.2 As the purification of [Fe2[μ-(SCH2)2NH](CN)2(CO)4][Et4N]2 by washing with hexane34 did not result in clean product, the recently described purification procedure for [Fe2[μ-(SCH2CH2CH2S)](CN)2(CO)4][Et4N]2 (ref. 2) was adopted for [Fe2[μ-(SCH2)2NH](CN)2(CO)4][Et4N]2.
[Fe2[μ-(SCH2CH2CH2S](CN)2(CO)4][Et4N]2, [Fe2[μ-(SCH2)2S](CN)2(CO)4][Et4N]2 and [Fe2[μ-(SCH2)2O](CN)2(CO)4][Et4N]2 were synthesized according to literature procedures33,35,36,38 and purity of each sample was checked by 1H NMR and IR spectroscopy. Samples were stored at −35 °C under inert atmosphere to avoid any decomposition of the artificial cofactors.
Maturation of apoCpI to CpIADT, CpIPDT, CpIODT or CpISDT with a 10 fold excess of [Fe2[μ-(SCH2)2X](CN)2(CO)4][Et4N]2 was achieved in a 0.1 M K2HPO4/KH2PO4 buffer system at pH 6.8 with 2 mM NaDT as described earlier26 at RT for 1 hour to ensure complete maturation of the sample. The semisynthetic enzymes were subsequently cleaned from leftover [2Fe] complex and buffered again into a 10 mM Tris–HCl buffer with pH 8.0 and 2 mM NaDT by use of a NAP™ 5 (GE Healthcare) size exclusion chromatography column. Enzyme preparations were concentrated using Amicon Ultra centrifugal filters 30 K (Millipore) under anaerobic conditions. Success of maturation and quality of purified protein samples of CpIADT were determined by testing their H2 production activity in vitro with methylviologen as electron donor using an established method.49 To test for catalytic activity of the non-native semisynthetic enzymes, the same method was applied and additional measurements with 10 fold increased protein amount were conducted to lower the limit of detection.
Box-like protein crystals of apoCpI and the semisynthetic hydrogenases were obtained with PEG 3000 or PEG 4000 as precipitant using the hanging drop or sitting drop vapor diffusion method at 277 K under anaerobic conditions within 2–4 days when mixing reservoir solution 1:1 with protein solution (10 mg ml−1). The crystallization conditions for the selected crystals of apoCpI were 12% PEG 3000, 0.1 M MES pH 6.5, 0.2 M MgCl2 in a sitting drop vapor diffusion experiment and cryo-protection was achieved with a final concentration of 15% glycerol in 15% PEG 3000, pH 6.5, 0.2 M MgCl2. CpIADT crystals selected for diffraction experiments were grown in 11% PEG 4000, 0.1 M MES pH 7.0, 0.2 M MgCl2 in a hanging drop experiment and protected against formation of ice crystals with paraffin oil. Crystals of the non-native semisynthetic enzymes were grown by hanging drop vapor diffusion using 0.1 M MES pH 6.0, 0.4 M MgCl2 and a total of 40% v/v of PEG4000 and glycerol to avoid the need of additional cryo-protection during crystal mounting. In detail the reservoir solutions contained 15% PEG 4000, 25% glycerol for CpIPDT, 19% PEG 4000, 21% glycerol for CpIODT and 21% PEG 4000, 19% glycerol for CpISDT.
Maturation capability of crystallized apoCpI was tested by washing a crystal in three fresh drops of its reservoir solution followed by dissolution of the crystal in cold 0.1 M K2HPO4/KH2PO4 buffer at pH 6.8 with 2 mM NaDT under strictly anaerobic conditions. Maturation was started by addition of 1.5 pmol Fe2[μ-(SCH2)2NH](CN)2(CO)4[Et4N]2 in 0.1 M K2HPO4/KH2PO4 buffer, pH 6.8, and allowed to proceed for 1 h at 4 °C. Subsequently the mixture was transferred completely into a solution of methylviologen, NaDT and phosphate buffer as for standard tests for H2 evolution activity and treated accordingly.49
Mounting of protein crystals into CryoLoops™ (Hampton Research) and subsequent flash-freezing in liquid N2 was performed under strictly anaerobic conditions at 298 K. Diffraction data were collected at 100 K at beamline BL44-XU at SPring-8 (Hyogo, Japan) and beamline PXII at the SLS (Villigen, Switzerland) and the data were processed using the software package HKL2000 (ref. 50) and XDS51 for apoCpI and the semisynthetic hydrogenases, respectively. Molecular replacement and structure optimization were performed with the software packages CCP4 (ref. 52) (apoCpI and CpIADT) and PHENIX53 (CpIPDT, CpIODT and CpISDT) and Coot.54 At least two final refinement runs were conducted with PHENIX on all structures to improve comparability of the final models. In order to estimate the occupancy of the 2FeH-cluster in the structures of CpIADT and other derivatives, we applied a partial occupancy refinement at the final stage of PHENIX refinement. Simulated annealing omit maps were calculated with PHENIX, omitting the H-cluster with the bridging cysteine residue and the residues around the central cavity as well as all atoms within the central cavity for the semisynthetic [FeFe]-hydrogenases and apoCpI, respectively.
2FeH | [2Fe] subcluster of the H-cluster of [FeFe]-hydrogenases |
4FeH | [4Fe4S] subcluster of the H-cluster |
ADT | Aza-dithiolate |
apoCpI | CpI lacking only the 2FeH-cluster |
CpI | [FeFe]-hydrogenase I from Clostridium pasteurianum |
CpIADT | apoCpI maturated in vitro with (Fe2[μ-(SCH2)2NH](CN)2(CO)42−) |
CpIODT | apoCpI maturated in vitro with (Fe2[μ-(SCH2)2O](CN)2(CO)42−) |
CpIPDT | apoCpI maturated in vitro with (Fe2[μ-(SCH2)2CH2](CN)2(CO)42−) |
CpISDT | apoCpI maturated in vitro with (Fe2[μ-(SCH2)2S](CN)2(CO)42−) |
DdH | [FeFe]-hydrogenase from Desulfovibrio desulfuricans |
HydA1 | [FeFe]-hydrogenase I from Chlamydomonas reinhardtii |
ODT | Oxo-dithiolate |
PDT | Propane-dithiolate |
SDT | Sulfur-dithiolate |
Footnotes |
† Electronic supplementary information (ESI) available: Tables listing and comparing the RMSD of the structures, distances and angles of the 2FeH-subclusters, the distances from 2FeH-subcluster atoms to selected amino acids and the distances of amino acids lining the 2FeH-subcluster cavity, a figure showing the presumed maturation channel in more detail and additional information on the suggested glycine hinges and stereo views of all figures presented in the main article. See DOI: 10.1039/c5sc03397g |
‡ Present addresses: Department of Life and Coordination-Complex Molecular Science, Institute for Molecular Science, National Institutes of Natural Sciences, Okazaki 444-8787, Japan. |
This journal is © The Royal Society of Chemistry 2016 |