Open Access Article
This Open Access Article is licensed under a Creative Commons Attribution-Non Commercial 3.0 Unported Licence

The enzyme-like catalytic hydrogen abstraction reaction mechanisms of cyclic hydrocarbons with magnesium-diluted Fe-MOF-74

Wen-zhi Luoa, Guang-hui Chen*a, Song-tao Xiao*b, Qiang Wangc, Ze-kun Huangd and Ling-yu Wangb
aDepartment of Chemistry, Shantou University, Guangdong 515063, China. E-mail: ghchen@stu.edu.cn
bInstitute of Radiochemistry, China Institute of Atomic Energy (CIAE), Beijing, 102413, People's Republic of China. E-mail: xiao200112@163.com
cDepartment of Applied Chemistry, College of Science, Nanjing Tech University, Nanjing 211816, People's Republic of China. E-mail: wangqiang@njtech.edu.cn
dThe Wolfson Department of Chemical Engineering, Israel Institute of Technology, Israel. E-mail: zekun-h@campus.technion.ac.il

Received 15th June 2019 , Accepted 22nd July 2019

First published on 30th July 2019


Abstract

Enzymatic heme and non-heme Fe(IV)–O species usually play an important role in hydrogen abstraction of biocatalytic reactions, yet duplicating the reactivity in biomimicry remains a great challenge. Based on Xiao et al.'s experimental work [Nat. Chem., 2014, 6(7), 590], we theoretically found that in the presence of the oxidant N2O, the enzyme-like metal organic framework, i.e., magnesium-diluted Fe-MOF-74 [Fe/(Mg)-MOF-74] can activate the C–H bonds of 1,4-cyclohexadiene (CHD) into benzene with a two-step hydrogen abstraction mechanism based on the density functional theory (DFT) level. It is shown that the first transition state about the cleavage of the N–O bond of N2O to form the Fe(IV)–O species is the rate-determining step with activation enthalpy of 19.4 kcal mol−1 and the complete reaction is exothermic by 62.8 kcal mol−1 on quintet rather than on triplet PES. In addition, we proposed a rebound mechanism of cyclic cyclohexane (CHA) hydroxylation to cyclohexanol which has not been studied experimentally. Note that the activation enthalpies on the first hydrogen abstraction for both cyclic CHD and cyclohexane are just 8.1 and 3.5 kcal mol−1, respectively, which are less than that of 13.9 kcal mol−1 for chained ethane. Most importantly, for the hydrogen abstraction of methane catalyzed by M/(Mg)-MOF-74 (M = Cu, Ni, Fe, and Co), we found that the activation enthalpies versus the C–H bond length of methane of TSs, NPA charge of the reacting oxyl atom have linear relationships with different slopes, i.e., shorter C–H bond and less absolute value of NPA charge of oxyl atom are associated with lower activation enthalpy; while for the activation of methane, ethane, propane and CHD catalyzed by Fe/(Mg)-MOF-74, there also exists positive correlations between activation enthalpies, bond dissociation energies (BDEs) and C–H bond lengths in TSs, respectively. We hope the present theoretical study may provide the guideline to predict the performance of MOFs in C–H bond activation reactions.


1. Introduction

Converting the relatively inactive C–H bond of hydrocarbons into higher value commodity chemicals, i.e., alcohol, aldehyde, and carboxylic acid remains a great challenge with enormous economic and environmental effect.1,2 Metalloenzymes have attracted great attention due to their special structures and functions as a target mimicking model.3–5 It is the high valent Fe(IV)–O of heme and nonheme enzymes that play crucial roles in selectively functionalizing C–H bonds.6–11 There are two methods to achieve the Fe(IV)–O high spin species: the first approach corresponds to utilizing weak-field ligands in an octahedral structure. Take [Fe(IV)O(H2O)5]2+ as an example,11 it has an quintet ground state and the substitution of water molecules by the strong-field ligands will lead to the triplet state;12 the other method corresponds to making use of trigonal bipyramidal geometry. For instance, the [Fe(IV)O–(TMG3tren)]2+ (TMG3tren = 1,1,1-trisamine) has a quintet ground state with trigonal bipyramidal structure, as characterized by Mössbauer spectroscopy.13

Metal organic frameworks (MOFs) are important porous crystalline materials that are composed of inorganic metal sites and organic ligands, which has been another vital structure that can be used for heterogeneous catalysis with Fe or other metals.14–19 The inner pores of these MOFs can determine reaction selectivity, and significantly, the structure of the pores can be changed by adjusting the organic ligands and metal sites. Like heme and nonheme enzymes of Fe(IV)–O intermediate, another attractive feature of MOFs is that redox active metals can be utilized as activity center, which can perform behavior similar to that in metalloenzymes, possibly exhibiting powerful enzyme-like catalytic activity. The MOF with isolated terminal Fe(IV)–O is a highly promising area of research. In addition, although the Fe(IV)–O intermediates generally make use of nitrogen-based chelating ligands, the metal center in MOF is also often linked by weak-field ligands, such as aryl oxides and carboxylates, which are surrounded in the coordination environment of framework structure. Thus, these materials may also have special electronic properties and reactivity imparted by their unique coordination environment. Indeed, C–H bond activation of chained hydrocarbons by MOFs have received extensive attentions. For example, Dale R. Pahls et al.20 reported Cu-functionalized NU-1000 MOF material can catalyze methane to methanol; Sarawoot Impeng et al.21 found that the C–H bond activation of ethane on the Fe(IV)–O species in a Zn-based cluster of MOFs; Xiao et al.22 have experimentally reported that a high-spin Fe(IV)–O species can be formed in magnesium-diluted Fe-MOF-74 [Fe/(Mg)-MOF-74] and thus affects the hydroxylation of ethane [Nat. Chem., 2014, 6(7), 590]. The weak-field ligand in magnesium-diluted Fe-MOF-74 obviously provide a suitable environment for a high-spin Fe(IV)–O to induce hydrogen abstraction reaction. Note that Xiao et al.23 have also found that expanded Fe-MOF-74 analogues can experimentally catalyze the reaction of cyclohexane to cyclohexanol but there exists also byproduct cyclohexanone, however, the Mg diluted Fe/(Mg)-MOF-74 in which 5% of the Mg atoms are substituted by Fe can hydroxylate ethane to ethanol to avoid overoxidation.22 And using nitrous oxide as an oxidant, Fe/(Mg)-MOF-74 can catalyze 1,4-cyclohexadiene (CHD) oxidation to produce benzene.22 However, no mechanism has been reported so far about the present reaction of catalysis oxidation of such a type of cyclic hydrocarbon, i.e., CHD. Surely, without carrying out accurate quantum chemistry calculations, we cannot understand the reaction mechanism in detail.

Therefore, we decide to study above reaction mechanism of CHD conversion to benzene catalyzed by Fe/(Mg)-MOF-74 with N2O as oxidant using Kohn–Sham density functional theory (DFT).24 Here we firstly propose the mechanism for oxidation of cyclic CHD, which corresponds to two-step hydrogen abstraction reactions with the primary products being benzene. In addition, we also proposed a rebound mechanism of cyclohexane (CHA) hydroxylation to cyclohexanol using Fe(IV)–O species of Fe/(Mg)-MOF-74 which has not been studied experimentally. Most importantly, we have built up the linear relationship between the activation enthalpies and descriptors, such as, the NPA charge of oxyl atoms, C–H lengths in TSs, and bond dissociation energy (BDE) of C–H bonds for different hydrocarbons with a series of M/(Mg)-MOF-74 (M = Cu, Ni, Fe, and Co), respectively, using the density functional theory (DFT).

2. Computational methods

Because the hydrogen abstraction reaction was observed with the catalysis of Fe/(Mg)-MOF-74 where Fe is diluted by Mg,22 we can make a hypothesis that the reaction occurs at a single Fe site and does not require the interactions of Fe–Fe.25 Therefore, we build a model of Fe/(Mg)-MOF-74 by carving a cluster from the crystal structure where the central metal site is Fe and the other two metal sites are Mg, as shown in Fig. 1(a). The dangling bonds of the cluster were saturated by hydrogen atoms to make the cluster neutral. The optimized cluster with one Fe atom, two Mg atoms and six organic ligands is shown in Fig. 1(b). For the sake of clarity, we chose the six atoms model to represent Fe/(Mg)-MOF-74, as shown in Fig. 1(c).
image file: c9ra04495g-f1.tif
Fig. 1 The structure of (a) magnesium-diluted Fe-MOF-74; (b) cluster model; and (c) six atoms model (color code: purple = Fe, red = O, light green = Mg, gray = C, and white = H).

DFT approaches including dispersion-corrected (DFT-D)26–28 is implemented to treat structures with long range dispersion interactions and give good results for geometry and energy of MOF.29–32 All Kohn–Sham calculations were performed with the M06-L33 exchange–correlation functional including D3 dispersion-corrected,27 which performs well for long range electron correlation effects and transition metal chemistry.22,34–36 Since the B3LYP-D3 has also been used to study the Fe–O chemistry recently,37 we did test calculations to see how it performs compared with M06-L-D3 exchange–correlation functional as shown in Table S1. From comparison with the bond lengths of the experimental structure and calculated ones, M06-L-D3 exchange–correlation functional performed better, i.e., the calculated relative error remains at about 0.25% compared with the experimental results. To reduce computational cost, we used the following strategy: geometry optimizations were adopted with the LANL2TZ(f)38–40 basis set for the valence electrons of Fe atom and the 6-31G(d, p)41 basis set for the other atoms, while effective core potential (LANL2) was employed for Fe. To get the reliable relative energy, the single-point energies were refined at the optimized geometries with same exchange–correlation functional and a def2-TZVP42 basis set for all atoms. Note that the Fe/(Mg)-MOF-74 cluster initially carved from the crystal structures were fully optimized. All transition states (TSs) were identified with one imaginary frequency, and internal reaction coordinate (IRC) calculations were carried out to prove that the TSs connecting the right reactants and products. The DFT calculations were performed with Gaussian 16 program package.43 The natural population analysis (NPA) were carried out based on the natural bond orbital theory with NBO 3.1 module44,45 as incorporated in Gaussian 16 package, while electron localization function (ELF)46 calculations to determine bonding nature were performed with Multiwfn 3.6 package.47

3. Results and discussion

For concise, we organized the content as follows: in Section 3.1, we mainly discussed the catalytic cycle for the oxidation of 1,4-cyclohexadiene (CHD) by N2O with the catalysis of Fe/(Mg)-MOF-74; in Section 3.2, the electronic structure analysis was performed for the oxidation of CHD; in Section 3.3, we proposed a rebound mechanism of cyclohexane (CHA) hydroxylation to cyclohexanol catalyzed by Fe(IV)–O species; in Section 3.4, we further explored the linear relationships between the activation enthalpies and descriptors, such as, the NPA charge of oxyl atoms, C–H lengths in TSs, and bond dissociation energy (BDE) of C–H bonds for different hydrocarbons with the catalysts of M/(Mg)-MOF-74 (M = Cu, Ni, Fe, and Co).

3.1 Catalytic cycle for the oxidation of 1,4-cyclohexadiene (CHD)

In order to interpret the reaction mechanism of CHD oxidized by N2O with the catalysis of Fe/(Mg)-MOF-74 experimentally reported by Xiao et al.22 we decide to carry out a theoretical calculation. At the DFT/M06-L-D3 level, it is found that the reaction proceeds with a catalytic cycle for the oxidation of CHD to benzene using enthalpy change as plotted in Scheme 1. The calculated ΔH and ΔG for various species are collected in Table S2. It is shown that there are three key steps with three transition-state structures in the catalytic cycle corresponding to: (1) formation of a Fe(IV)–O intermediate with the O atom of N2O adding on Fe/(Mg)-MOF-74 via TS1; (2) the first hydrogen abstraction of CHD by the Fe(IV)–O intermediate via TS2; (3) the second hydrogen abstraction of CHD radical by Fe(III)–OH intermediate to form benzene through TS3. Note that the above reactions in three processes on triplet and quintet potential energy surfaces (PESs) are plotted in Fig. 2, respectively.
image file: c9ra04495g-s1.tif
Scheme 1 The proposed mechanism for the oxidation of CHD to benzene with the catalysis of Fe/(Mg)-MOF-74.

image file: c9ra04495g-f2.tif
Fig. 2 The plotted enthalpy profiles of the catalytic oxidation of CHD by Fe/(Mg)-MOF-74 on triplet and quintet surfaces.

It is found that the relative enthalpies of all species that react on the quintet state surface are generally lower than those of on triplet one. Note that although the barrier of 3TS1 on the triplet surface is just 3.4 kcal mol−1, which is 16.0 kcal mol−1 lower than that of 19.4 kcal mol−1 of 5TS1, which indicates that the triplet state is sometimes lower in energy compared with the quintet to bring about two-state reactivity of a hydroxylation reaction. This is consistent with recent computational work on the hydroxylation of methane using Fe(IV)oxo in MOF-74.25 However, in this case, the adsorption enthalpy from A (the bare cluster) to B (the N2O bound to Fe of A) is less than that of the quintet pathway (2.2 kcal mol−1 vs. 8.5 kcal mol−1), and the relative energy of the reactant is generally higher than that of the quintet surface at least 37.5 kcal mol−1. Note that the activation barrier 5TS2 and 5TS3 on quintet surface are just 3.5 and 4.7 kcal mol−1 which are also less than those of 5.2 and 7.9 kcal mol−1 on triplet, respectively. So, the reaction will dominantly proceed on quintet PES and it is important to analyze the relevant structures of the hydrogen abstraction process between Fe/(Mg)-MOF-74 and CHD on quintet PES.

The important structures for the catalytic cycle reaction on quintet PES is shown in Fig. 3. From Scheme 1 and Fig. 3, it is found that the Fe–O–N angle is 117° with Fe–O bond at 2.48 Å for the structure B which is in agreement with powder neutron diffraction data.22 The three steps including three transition-state structures in the catalytic cycle are discussed in sequence as follows: (1) formation of a Fe(IV)–O intermediate via 5TS1: the first transition state about the cleavage of N–O bond of N2O to form the Fe(IV)–O (A–O) species is the rate-determining step with activation enthalpy of 19.4 kcal mol−1. The Fe–O bond distance is shortened from 2.48 Å in B to 1.87 Å in 5TS1, while the C–H bond distance is elongated from 1.20 to 1.49 Å. Then the C species is formed corresponding to an octahedron with Fe(IV)–O and N2. Note that the process from B to C is highly exothermic (ΔH = −15.6 kcal mol−1); (2) the first hydrogen abstraction of CHD by Fe(IV)–O intermediate via 5TS2: when N2 gets away from C the CHD is bound to Fe(IV)–O to form D species. And the first hydrogen abstraction is accomplished via 5TS2 from D to form the Fe(III)–OH with a nearby CHD radical (E). The activation enthalpy of 5TS2 is 3.5 kcal mol−1, which is less than 13.9 kcal mol−1 reported by Xiao et al.48 for oxidation of ethane. The reason may be that the bond dissociation energy (BDE) of CHD is less than that of ethane (75.1 kcal mol−1 vs. 99.8 kcal mol−1 as listed in Table 3). Note that the Fe–O bond distance is elongated from 1.62 to 1.71 Å from D to 5TS2, while the C–H bond is elongated from 1.10 to 1.23 Å; (3) the second hydrogen abstraction of CHD radical by Fe(III)–OH intermediate to form benzene via 5TS3: the E species undergoes conformational change to form F species that is related to the second hydrogen bound to Fe(III)–OH and the Fe(III)–OH abstracts the second hydrogen of CHD radical to benzene (G) via 5TS3. Note that the Fe–O bond distance is elongated from 1.85 to 1.93 Å from F to 5TS3, while the C–H bond distance of CHD radical is elongated from 1.11 to 1.19 Å, indicating that the second hydrogen of CHD radical is close to O of Fe(III)–OH while the O is away from Fe center. This makes the H2O easily separated from Fe(II) and the catalyst recyclable. At last, the reaction ends up with the products benzene, N2 and H2O, which are in agreement with experiment.22


image file: c9ra04495g-f3.tif
Fig. 3 The selected important information of the most favorable PES (quintet surface) for oxidation of CHD.

3.2 The electronic structure analysis of species on quintet PES for oxidation of CHD

In order to deeply understand the catalysis reaction mechanism, we also analyzed the electronic structures of quintet species. In Table 1, we listed the population, Wiberg bond index for the stationary points and TSs along the reaction path on quintet for the Fe center and oxygen atoms around. It is found that the spin density on the Fe center for all species lies between 2.90 and 3.90, and the unpaired electron on all species is significantly located the metal center (Fig. S1), indicating that the Fe center is high-spin states. The NPA charge on the Fe center of bare cluster A and B are 1.09 and 1.03e, respectively, suggesting that the adsorption of N2O is followed by the negative charge transfer from the rest atoms of the complex to Fe. Note that the average NPA charge on the five oxygen atoms (O1–O5) around the Fe remains almost unchanged during hydrogen abstraction catalytic cycle, indicating no influence of the oxygen atoms bound to the Fe center. Similarly, the average bond distances of Fe–On (n = 1–5) show almost no change along the reaction pathway. After crossing over 5TS1, the oxidation state of Fe center changes from II to IV. Meanwhile, the spin density on Fe atom is reduced from 3.65 (B) to 2.90 (C). This is also accompanied by the increase in spin density on O6 from 0.01 to 0.66. The calculated bond distance and Wiberg bond index of Fe–O6 are 1.62 Å and 1.42, respectively, indicating a double bond, which is in line with EXAFS and X-ray on Fe(IV)–O length in heme49 and non-heme enzymes (1.64–1.68 Å).50
Table 1 The calculated NPA charges (in atomic units), spin densities (in atomic units) for various species of the oxidation reaction of CHD catalyzed by Fe(Mg)-MOF-74
Project Species
A B 5TS1 C D 5TS2 E F 5TS3 G
a Average charge on the five MOF oxygen atoms in the first coordination shell of Fe.b O6 is the oxygen atom transferred from N2O to the Fe center.c Average Fe–O distance for the five oxygen atoms (O1–O5) in the first coordination shell of Fe.
Oxidation state II II II IV IV III III III III II
Fe spin population 3.65 3.65 3.78 2.90 3.12 3.57 3.92 3.90 3.65 3.66
O spin population 0.01 −0.01 0.66 0.65 0.45 0.4 0.37 0.23 0.03
Fe NPA charge 1.09 1.03 1.15 0.95 0.95 1.10 1.21 1.19 1.17 1.02
O NPA charge −0.34 −0.54 −0.38 −0.38 −0.64 −0.91 −0.93 −0.95 −0.94
Charge on O1–O5a −0.82 −0.83 −0.80 −0.78 −0.78 −0.80 −0.81 −0.81 −0.81 −0.83
Fe–O6 distanceb 2.48 1.87 1.62 1.62 1.71 1.84 1.85 1.93 2.28
Fe–O distancec 2.08 2.09 2.09 2.09 2.09 2.11 2.10 2.11 2.10 2.10
Wiberg bond index of Fe–O6 0.11 0.51 1.42 1.43 1.00 0.63 0.61 0.45 0.17


To gain more electronic structure information about hydrogen abstraction reaction, we also calculated the electron localized function (ELF)46,51 and orbital interaction. We mainly focus on the first hydrogen abstraction step, which possesses the features of significant interest.52 In Fig. 4, the color-scale plot of the electron localization function (ELF) of structure 5TS2, B and C is shown to describe the first hydrogen abstraction of CHD by Fe/(Mg)-MOF-74. ELF is a three-dimensional real space function with a numerical range between 0.0 and 1.0. In short, the areas surrounded by the ELF isosurface is of large ELF values, where electrons are more localized and are thus not easy to get out of it. On the contrary, the weak electron localization area is with small ELF value, indicating that the electrons placed there can be easily delved into other areas. Note that the deep blue area with the small ELF value between O and H atoms indicates the electron localization is weak in B. As the reaction goes on, the H atom gets closer to the O atom, the ELF value slowly increases between O and H in 5TS2. Finally, when H atom transfers to O of Fe(IV)–O nearby, the relatively smooth yellow area of the O–H is formed, where the electrons are more localized between H and O atom in C species.


image file: c9ra04495g-f4.tif
Fig. 4 Color-scale plot of the electron localization function (ELF) of species 5TS2, B and C for the first hydrogen abstraction of CHD catalyzed by Fe/(Mg)-MOF-74.

Since we cannot clarify the steric difference of the two transition states for oxidation of CHD, the reason for lower enthalpy of 5TS2 compared with 3TS2 requires an explanation. In Scheme 2, it is shown that on both triplet and quintet PESs, the d-area of Fe(IV)–O gets an electron during the hydrogen abstraction step and the σCH bond orbital of the CHD is converted to a singly occupied orbital of the CHD ϕC. In Fig. S2(a)–(d), from the plotted spin natural orbitals, natural orbitals and their occupations of 5A–O, 3A–O, 5TS2 and 3TS2, respectively, it is found that in 5TS2, there is a spin-down electron in an ϕC orbital which is located on the CHD and five unpaired spin-up electrons in the d-area. Thus, as shown in Scheme 2(a), the d-area of 5TS2 gets an electron in the unoccupied image file: c9ra04495g-t1.tif orbital, while the C–H bond orbital is transferred to a singly occupied spin-down orbital of CHD, which can be called as σ-pathway. On the other hand, in 3TS2, there is a singly occupied spin-up electron in the d-area and another one in the CHD, as shown in Scheme 2(b). The gained d electron is now in dyz orbital which is the main component of the image file: c9ra04495g-t2.tif orbital, which can be called as π-pathway. Note that the d-area of 5TS2 gets a spin-up electron in the image file: c9ra04495g-t3.tif orbital and 3TS2 gets a spin-down in the image file: c9ra04495g-t4.tif orbital, and we have known the orbital-selection principle for the spin dependent orientation selectivity,53–56 therefore, the TSs may adjust the direction and tend to maximize the overlap of the two orbitals participating in the electronic transition. In Scheme 2(a), it is shown that a spin-up electron is transferred to the image file: c9ra04495g-t5.tif orbital on quintet, and the favorable geometry of 5TS2 is the image file: c9ra04495g-t6.tif overlap. As can be seen from the overlap sketch map in Scheme 2(a), a vertical orientation of 5TS2 will maximize this overlap and suggest the preferred pathway of the transition state. By comparison with quintet, a spin-down electron of C–H on triplet PES is transferred to one of the image file: c9ra04495g-t7.tif orbitals of Fe–O, and thus, the overlap sketch map shows that the preferred structure of 3TS2 should involve a sideway attack due to the large steric effect and the unavoidably increased Pauli repulsion, resulting in the attack angle to about 120° and less overlap than the quintet one (Scheme 2(b)). It makes a rationalization that the activation enthalpy of 5TS2 is 3.5 kcal mol−1 which is less than that of 3TS2 with 4.7 kcal mol−1 as shown in Fig. 2.


image file: c9ra04495g-s2.tif
Scheme 2 Electron shifts diagrams during the first step of hydrogen abstraction on (a) quintet; and (b) triplet.

3.3 The rebound mechanism for the oxidation of cyclohexane (CHA)

Xiao et al.22,23 have also reported that expanded Fe-MOF-74 analogues can oxidize CHA to cyclohexanol experimentally but the byproduct cyclohexanone will be produced. However, the Mg-diluted Fe-MOF-74, i.e., Fe/(Mg)-MOF-74 can hydroxylate alkanes to avoid overoxidation. Taking advantage of this, we considered that Fe/(Mg)-MOF-74 may hydroxylate CHA to avoid overoxidation. Note that the mechanism of CHA hydroxylation to cyclohexanol catalyzed by Fe/(Mg)-MOF-74 has not been reported either experimentally or theoretically.

In Fig. 5, the favorable quintet PES and important structures for the CHA hydroxylation reaction using enthalpy change are plotted. The calculated ΔH and ΔG for various species are collected in Table S2. Starting from the H species corresponding to the bound of CHA with Fe(IV)–O, crossing the activation enthalpy 8.1 kcal mol−1 of TS4, which is less than that of 13.9 kcal mol−1 reported by Xiao et al. for oxidation of ethane,48 the species I will be formed corresponding to the broken of C–H bond in CHA with exothermicity by 5.2 kcal mol−1. Note that the Fe–O bond distance is elongated from 1.62 to 1.72 Å from H to 5TS4, while the C–H bond is elongated from 1.10 to 1.32 Å at the same time. The next step corresponds to the reaction of the Fe(III)–OH species with the CHA radical to cyclohexanol via 5TS5. Note that the 5TS5 is formed after rotating a hydrogen atom of the hydroxo group along the Fe(III)–O axis in intermediate I and the CHA radical moves closer to the oxyl on Fe(III) center. Note that from I to 5TS5, the Fe–O bond is elongated from 1.83 to 1.86 Å, with the activation enthalpy just 0.9 kcal mol−1. Finally, the CHA radical abstracted the hydroxyl group to form cyclohexanol (J).


image file: c9ra04495g-f5.tif
Fig. 5 The selected important information of the most favorable PES (quintet surface) of cyclohexane hydroxylation to cyclohexanol with a rebound mechanism. Note that partial hydrogen atoms of cyclohexane are omitted for concision.

The above reaction mechanism can be called as rebound mechanism since a radical produced by hydrogen abstraction rebound to oxygen atom of hydroxyl group to form alcohol. Note that the activation enthalpy of 8.1 kcal mol−1 for oxidation of CHA is larger than that of 3.5 kcal mol−1 of for hydrogen abstraction step in CHD. And different from the oxidation of CHD to benzene via two step hydrogen abstraction, the oxidation of CHA to cyclohexanol corresponds to a rebound mechanism.

3.4 The linear relationships between C–H bond activation enthalpies and descriptors of different hydrocarbons with the catalysis of M/(Mg)-MOF-74 (M = Cu, Ni, Fe, and Co)

It is important to evaluate the relationship between the C–H bond activation enthalpies and descriptors like NPA charge of oxyl atom, C–H bond length of TSs and bond dissociation energy (BDE) of C–H bonds for methane, ethane, propane and CHD with M/(Mg)-MOF-74 (M = Cu, Ni, Fe, and Co), respectively. Generally, the chemical reactions may occur where the charge is concentrated, so the ability of M–O clusters for methane activation is known to be actually sensitive to the charge density on O of M–O clusters,57,58 and the NPA charge of O may serve as a predictive descriptor.

Take the hydrogen abstraction of methane as an example, it is shown that the activation enthalpies and NPA charges in reactions catalyzed by M/(Mg)-MOF-74 (M = Cu, Ni, Fe, and Co) are 8.8, 11.7, 15.3, and 19.4 kcal mol−1 as well as −0.682, −0.687, −0.712, and −0.714e, respectively, as listed in Table 2. In Fig. 6(a), it is shown that there exists the linear relationship between the activation enthalpies and the NPA charges of the reacting oxyl atom, i.e., the less of absolute value of NPA charge of oxyl atom, the lower of the activation enthalpy (R2 = 0.810).

Table 2 The calculated activation enthalpy, C–H bond length of TS and NPA charges of oxyl for the oxidation reaction of methane catalyzed by M/(Mg)-MOF-74 (M = Cu, Ni, Fe, and Co)
Project Metal center
Cu Ni Fe Co
Activation enthalpy (kcal mol−1) 8.8 11.7 15.3 19.4
C–H bond length of TS (Å) 1.299 1.307 1.351 1.442
NPA charge of oxyl (e) −0.682 −0.687 −0.712 −0.714



image file: c9ra04495g-f6.tif
Fig. 6 Plots of activation enthalpy (ΔH) of methane versus (a) NPA charge of oxyl atom; (b) C–H bond length in TSs for M/(Mg)-MOF-74 (M = Cu, Ni, Fe, and Co). Note that regression line is in red.

In the following, we turn to analyze the C–H bond lengths of transition state structures. It is shown that the C–H bond lengths of methane in TSs on quintet PES catalyzed by M/Mg-MOF-74 (M = Cu, Ni, Fe, and Co) are 1.299, 1.307, 1.351, and 1.442 Å, respectively, as collected in Table 2. Note that the activation enthalpies in reactions catalyzed by M/Mg-MOF-74 (M = Cu, Ni, Fe, and Co) are 8.8, 11.7, 15.3, and 19.4 kcal mol−1, respectively. And there is a linear correlation between C–H bond lengths of TSs and activation enthalpies of the reaction of different M–O clusters as plotted in Fig. 6(b) (R2 = 0.870). This means shorter C–H bonds in TSs is associated with lower activation enthalpy. Furthermore, the activation enthalpies and C–H bond length of TSs for methane, ethane, propane and CHD catalyzed by Fe/(Mg)-MOF-74 are 15.3, 11.4, 10.3, and 3.5 kcal mol−1, as well as 1.351, 1.310, 1.265, and 1.226 Å, respectively, as listed in Table 3. Obviously, both the activation enthalpies and C–H bond lengths decrease as the number of carbon atom increases. It also has a linear correlation between C–H bond lengths of TSs and activation enthalpies of the reaction of different hydrocarbon as plotted in Fig. 7(a) (R2 = 0.863).

Table 3 The calculated activation enthalpy, C–H bond length of TS and bond dissociation energy (BDE) for the oxidation reaction of methane, ethane, propane, CHD catalyzed by Fe/(Mg)-MOF-74
Project Hydrocarbon
Methane Ethane Propane CHD
Activation enthalpy (kcal mol−1) 15.3 11.4 10.3 3.5
C–H bond length of TS (Å) 1.351 1.310 1.265 1.226
C–H bond (BDE) (kcal mol−1) 103.9 99.8 96.9 75.1



image file: c9ra04495g-f7.tif
Fig. 7 Plots of activation enthalpy (ΔH) versus (a) C–H bond length in TSs; and (b) C–H bond dissociation energy (BDE) for C1, C2, C3, C6 species. Note that regression line is in red.

These results are clearly in agreement with the Hammond hypothesis,59 i.e., a more reactive oxyl (less activation enthalpies) should have a transition state (TS) structure closer to reactants. Note that it is clear that for the hydrogen abstraction reaction of methane with catalysis of Cu/(Mg)-MOF-74, there exist the lowest activation enthalpy as plotted in Fig. 6. The reason may result from that Cu/(Mg)-MOF-74 has the largest NPA charge (−0.682e) and shortest C–H bond length (1.299 Å) in TS compared with those of M/(Mg)-MOF-74 (M = Ni, Fe, and Co). We hope the present theoretical result may stimulate the experimental synthesis of Cu/(Mg)-MOF-74 further.

In addition, inspired by the report on dissociation energy of molecular fragments [–OH, –OCH3, and –O(O)CH] on Pt (1,1,1) surfaces by Eric M. Karp et al.,60 we expect different hydrocarbon catalyzed by Fe/(Mg)-MOF-74 to be related to the reactant's C–H bond dissociation energy (BDE). From Table 3, we found that the activation enthalpies and BDE of C–H bond for methane, ethane, propane and CHD (C1, C2, C3, and C6) are 15.3, 11.4, 10.3, and 3.5 kcal mol−1 as well as 103.9, 99.8, 96.9, and 75.1 kcal mol−1, respectively. It is clear that the BDE of C6 is less than that of C1, C2 and C3, so CHD is the easiest one to be activated. From Fig. 7(b), it is shown that there exists linear correlation between the activation enthalpies and bond dissociation energies (BDEs) of C–H bonds in methane, ethane, propane and CHD (C1, C2, C3, and C6) (R2 = 0.917). According to this, we can estimate activation enthalpy without needing to optimize the TS structures.

4. Conclusions

In this article, we mainly explored the reaction mechanisms of activation of C–H bonds in CHD and CHA catalyzed by enzyme-like Fe/(Mg)-MOF-74 based on the density functional theory at the M06-L-D3 level. It is found that in the presence of oxidant N2O, the magnesium-diluted MOF, i.e., Fe/(Mg)-MOF-74, can catalyze the activation of C–H bond of CHD by hydrogen transfer to benzene. It is shown that the first transition state (TS1) on quintet PES corresponding to the cleavage of N–O bond of N2O to the Fe(IV)–O species is the rate-determining step with activation enthalpy of 19.4 kcal mol−1 followed by two-step hydrogen abstraction processes with TS2 and TS3, respectively, with exothermicity of 62.8 kcal mol−1. The electronic structure calculations indicate that the reaction favors the “σ-pathway” via a linear attack between σCH orbital of CHD and image file: c9ra04495g-t8.tif orbital of Fe(IV)–O on quintet surface, rather than on triplet one. Different from the two-step hydrogen abstraction from CHD to benzene, the CHA can be oxidized to cyclohexanol with a rebound mechanism that involves H atom bonded to O atom of Fe–O at first, and CHA radical moves closer to the O atom on Fe(III) center to form cyclohexanol.

In addition, for the catalysis by M/(Mg)-MOF-74 (M = Cu, Ni, Fe, and Co) of hydrogen abstraction of methane, it is found that there exists linear relationships between the activation enthalpies, C–H bond lengths of hydrogen-abstraction transition states, and NPA charge of the reacting oxyl atoms, i.e., shorter C–H bond and less absolute value of NPA charge of oxyl atom are associated with lower activation enthalpy. It should be noted that there is the lowest activation enthalpy for the hydrogen abstraction reaction of methane with the catalysis of Cu/(Mg)-MOF-74. With the catalysis of Fe/(Mg)-MOF-74, it is shown that the C–H bond dissociation energies (BDEs) and the C–H bond lengths in TSs of methane, ethane, propane, and CHD have a positive correlation versus their activation enthalpies, i.e., the lower BDE of hydrocarbon and shorter C–H bond length of TS correspond to lower activation enthalpies. The above descriptors should be useful to predict the catalysis activity of enzyme-like MOF in activating C–H bond. We hope the present theoretical modeling may give a guide toward the synthesis of metalloenzyme-like MOFs for the activation of C–H bond.

Conflicts of interest

There are no conflicts to declare.

Acknowledgements

The work was supported by the National Natural Science Foundation of China (No. 21373112, 21790371).

References

  1. H. Arakawa, M. Aresta, J. N. Armor, M. A. Barteau, E. J. Beckman, A. T. Bell, J. E. Bercaw, C. Creutz, E. Dinjus, D. A. Dixon, K. Domen, D. L. DuBois, J. Eckert, E. Fujita, D. H. Gibson, W. A. Goddard, D. W. Goodman, J. Keller, G. J. Kubas, H. H. Kung, J. E. Lyons, L. E. Manzer, T. J. Marks, K. Morokuma, K. M. Nicholas, R. Periana, L. Que, J. Rostrup-Nielson, W. M. H. Sachtler, L. D. Schmidt, A. Sen, G. A. Somorjai, P. C. Stair, B. R. Stults and W. Tumas, Chem. Rev., 2001, 101, 953–996 CrossRef CAS PubMed.
  2. R. G. Bergman, Nature, 2007, 446, 391 CrossRef CAS PubMed.
  3. K. D. Karlin, Science, 1993, 261, 701 CrossRef CAS PubMed.
  4. C. E. Valdez, Q. A. Smith, M. R. Nechay and A. N. Alexandrova, Acc. Chem. Res., 2014, 47, 3110–3117 CrossRef CAS PubMed.
  5. F. Schwizer, Y. Okamoto, T. Heinisch, Y. Gu, M. M. Pellizzoni, V. Lebrun, R. Reuter, V. Köhler, J. C. Lewis and T. R. Ward, Chem. Rev., 2018, 118, 142–231 CrossRef CAS PubMed.
  6. W. Nam, Acc. Chem. Res., 2007, 40, 465 CrossRef CAS.
  7. J. Hohenberger, K. Ray and K. Meyer, Nat. Commun., 2012, 3, 720 CrossRef PubMed.
  8. J. T. Groves, J. Inorg. Biochem., 2006, 100, 434–447 CrossRef CAS PubMed.
  9. K. Ray, F. F. Pfaff, B. Wang and W. Nam, J. Am. Chem. Soc., 2014, 136, 13942–13958 CrossRef CAS PubMed.
  10. S. Ye and F. Neese, Proc. Natl. Acad. Sci. U. S. A., 2011, 108, 1228 CrossRef CAS PubMed.
  11. O. Pestovsky, S. Stoian, E. L. Bominaar, X. Shan, E. Münck, L. Que and A. Bakac, Angew. Chem., Int. Ed., 2005, 44, 6871–6874 CrossRef CAS PubMed.
  12. L. Bernasconi, M. J. Louwerse and E. J. Baerends, Eur. J. Inorg. Chem., 2007, 2007, 3023–3033 CrossRef.
  13. J. England, M. Martinho, E. R. Farquhar, J. R. Frisch, E. L. Bominaar, E. Münck and L. Que, Angew. Chem., 2009, 121, 3676–3680 CrossRef.
  14. S. Kitagawa, R. Kitaura and S. Noro, Angew. Chem., Int. Ed. Engl., 2004, 43, 2334–2375 CrossRef CAS PubMed.
  15. H.-C. Zhou, J. R. Long and O. M. Yaghi, Chem. Rev., 2012, 112, 673–674 CrossRef CAS PubMed.
  16. Z. Y. Gu, J. Park, A. Raiff, Z. Wei and H. C. Zhou, ChemCatChem, 2013, 6, 67–75 CrossRef.
  17. G. Ferey, Chem. Soc. Rev., 2008, 37, 191–214 RSC.
  18. J. Lee, O. K. Farha, J. Roberts, K. A. Scheidt, S. T. Nguyen and J. T. Hupp, Chem. Soc. Rev., 2009, 38, 1450–1459 RSC.
  19. M. Yoon, R. Srirambalaji and K. Kim, Chem. Rev., 2012, 112, 1196–1231 CrossRef CAS PubMed.
  20. T. Ikuno, J. Zheng, A. Vjunov, M. Sanchez-Sanchez, M. A. Ortuño, D. R. Pahls, J. L. Fulton, D. M. Camaioni, Z. Li, D. Ray, B. L. Mehdi, N. D. Browning, O. K. Farha, J. T. Hupp, C. J. Cramer, L. Gagliardi and J. A. Lercher, J. Am. Chem. Soc., 2017, 139, 10294–10301 CrossRef CAS PubMed.
  21. S. Impeng, S. Siwaipram, S. Bureekaew and M. Probst, Phys. Chem. Chem. Phys., 2017, 19, 3782–3791 RSC.
  22. D. J. Xiao, E. D. Bloch, J. A. Mason, W. L. Queen, M. R. Hudson, N. Planas, J. Borycz, A. L. Dzubak, P. Verma, K. Lee, F. Bonino, V. Crocella, J. Yano, S. Bordiga, D. G. Truhlar, L. Gagliardi, C. M. Brown and J. R. Long, Nat. Chem., 2014, 6, 590–595 CrossRef CAS PubMed.
  23. D. J. Xiao, J. Oktawiec, P. J. Milner and J. R. Long, J. Am. Chem. Soc., 2016, 138, 14371–14379 CrossRef CAS PubMed.
  24. W. Kohn, A. D. Becke and R. G. Parr, J. Phys. Chem., 1996, 100, 12974–12980 CrossRef CAS.
  25. F. Saiz and L. Bernasconi, Phys. Chem. Chem. Phys., 2019, 21, 4965 RSC.
  26. S. Grimme, J. Comput. Chem., 2004, 25, 1463–1473 CrossRef CAS PubMed.
  27. S. Grimme, J. Comput. Chem., 2006, 27, 1787–1799 CrossRef CAS PubMed.
  28. S. Grimme, J. Antony, S. Ehrlich and H. Krieg, J. Chem. Phys., 2010, 132, 154104 CrossRef PubMed.
  29. L. Valenzano, B. Civalleri, S. Chavan, G. T. Palomino, C. O. Areán and S. Bordiga, J. Phys. Chem. C, 2010, 114, 11185–11191 CrossRef CAS.
  30. C. R. A. Daniel, N. M. Rodrigues, N. B. da Costa and R. O. Freire, J. Phys. Chem. C, 2015, 119, 23398–23406 CrossRef CAS.
  31. R. Poloni, B. Smit and J. B. Neaton, J. Am. Chem. Soc., 2012, 134, 6714–6719 CrossRef CAS PubMed.
  32. K. Lee, J. D. Howe, L.-C. Lin, B. Smit and J. B. Neaton, Chem. Mater., 2015, 27, 668–678 CrossRef CAS.
  33. Y. Zhao and D. G. Truhlar, Theor. Chem. Acc., 2008, 120, 215–241 Search PubMed.
  34. Y. Zhao and D. G. Truhlar, Acc. Chem. Res., 2008, 41, 157–167 CrossRef CAS PubMed.
  35. Y. Zhao and D. G. Truhlar, Chem. Phys. Lett., 2011, 502, 1–13 CrossRef CAS.
  36. Y. Zhao and D. G. Truhlar, J. Phys. Chem. C, 2008, 112, 6860–6868 CrossRef CAS.
  37. M. SwartAndré, A. R. Groenhof, A. W. Ehlers and K. Lammertsma, J. Phys. Chem. A, 2004, 108, 5479–5483 CrossRef.
  38. D. Feller, J. Comput. Chem., 1996, 17, 1571–1586 CrossRef CAS.
  39. K. L. Schuchardt, B. T. Didier, T. Elsethagen, L. Sun, V. Gurumoorthi, J. Chase, J. Li and T. L. Windus, J. Chem. Inf. Model., 2007, 47, 1045–1052 CrossRef CAS PubMed.
  40. L. E. Roy, P. J. Hay and R. L. Martin, J. Chem. Theory Comput., 2008, 4, 1029–1031 CrossRef CAS PubMed.
  41. R. Ditchfield, W. J. Hehre and J. A. Pople, J. Chem. Phys., 1971, 54, 724–728 CrossRef CAS.
  42. F. Weigend and R. Ahlrichs, Phys. Chem. Chem. Phys., 2005, 7, 3297–3305 RSC.
  43. M. J. Frisch, G. W. Trucks and H. B. Schlegel, Gaussian, Wallingford, CT, USA, 2016 Search PubMed.
  44. E. D. Glendening, A. E. Reed, J. E. Carpenter and F. Weinhold, NBO Program, Version 3.1 Search PubMed.
  45. A. E. Reed, R. B. Weinstock and F. Weinhold, J. Chem. Phys., 1985, 83, 735–746 CrossRef CAS.
  46. T. Lu and F.-W. Chen, Acta Phys.-Chim. Sin., 2011, 27, 2786–2792 CAS.
  47. T. Lu and F. Chen, J. Comput. Chem., 2011, 33, 580–592 CrossRef PubMed.
  48. P. Verma, K. D. Vogiatzis, N. Planas, J. Borycz, D. J. Xiao, J. R. Long, L. Gagliardi and D. G. Truhlar, J. Am. Chem. Soc., 2015, 137, 5770–5781 CrossRef CAS PubMed.
  49. T. L. Poulos, Chem. Rev., 2014, 114, 3919–3962 CrossRef CAS PubMed.
  50. C. Krebs, D. Galonić Fujimori, C. T. Walsh and J. M. Bollinger, Acc. Chem. Res., 2007, 40, 484–492 CrossRef CAS PubMed.
  51. R. F. W. Bader, Atoms in Molecules: A Quantum Theory, Oxford University Press, Oxford, U.K., 1990 Search PubMed.
  52. L. Que, Acc. Chem. Res., 2007, 40, 493–500 CrossRef CAS PubMed.
  53. H. Hirao, D. Kumar, L. Que and S. Shaik, J. Am. Chem. Soc., 2006, 128, 8590–8606 CrossRef CAS PubMed.
  54. S. Shaik, H. Chen and D. Janardanan, Nat. Chem., 2010, 3, 19 CrossRef PubMed.
  55. S. Shaik, H. Hirao and D. Kumar, Acc. Chem. Res., 2007, 40, 532–542 CrossRef CAS PubMed.
  56. H. Chen, W. Lai and S. Shaik, J. Phys. Chem. Lett., 2010, 1, 1533–1540 CrossRef CAS.
  57. N. Dietl, M. Schlangen and H. Schwarz, Angew. Chem., Int. Ed., 2012, 51, 5544–5555 CrossRef CAS PubMed.
  58. X.-L. Ding, X.-N. Wu, Y.-X. Zhao and S.-G. He, Acc. Chem. Res., 2012, 45, 382–390 CrossRef CAS PubMed.
  59. G. S. Hammond, J. Am. Chem. Soc., 1955, 77, 334–338 CrossRef CAS.
  60. E. M. Karp, T. L. Silbaugh and C. T. Campbell, J. Am. Chem. Soc., 2014, 136, 4137–4140 CrossRef CAS PubMed.

Footnote

Electronic supplementary information (ESI) available. See DOI: 10.1039/c9ra04495g

This journal is © The Royal Society of Chemistry 2019
Click here to see how this site uses Cookies. View our privacy policy here.