Binduja
Mohan†
,
Noushija Mannanthara
Kunhumon†
and
Sankarasekaran
Shanmugaraju
*
Department of Chemistry, Indian Institute of Technology Palakkad, Palakkad-678557, Kerala, India. E-mail: shanmugam@iitpkd.ac.in
First published on 7th July 2023
Fluorescence chemosensors for selective sensing and quantification of biologically important metal ions have attracted substantial research interest in recent years. Cu(II) is the third most abundant transition metal ion and an essential heavy metal ion present in the human body. Cu(II) plays many essential functions in living systems as a catalytic co-factor in various enzyme functions and electron transport. The alteration in the essential concentration of Cu(II) causes several deadly diseases like Menke's syndrome, Wilson's disease, and Alzheimer's disease. Given this, in the past decades, many small-molecule fluorescence sensors have been developed and employed for trace detection and monitoring the concentration of Cu(II) ions in biological systems. In particular, amino-1,8-naphthalimide fluorescence sensors have gained special research interest for Cu(II) sensing because of their facile synthesis, easy functional, structure tunability, and strong fluorescence emission in the visible region. In this article, we have discussed the applications of various amino-1,8-naphthalimide-based small-molecule fluorescence chemosensors for selective sensing and bioimaging of Cu(II) ions. In each section, we provide a detailed report on the synthesis, photophysics, and fluorescence sensing properties including bioimaging of amino-1,8-naphthalimide-small-molecule fluorescence chemosensors for Cu(II) ions.
Cu(II) is considered an essential trace heavy metal nutrient and the third most abundant transition metal after Fe(II) and Zn(II) in the human body.6 Cu(II) plays many indispensable roles like a catalytic cofactor, controlling enzyme functions, and being involved in electron transport.7 The alteration in the uptake or consumption of Cu(II) levels in the human body could result in various deadly diseases like Menke's syndrome, Wilson's disease, and Alzheimer's disease.8–10 Besides, long-term exposure and consumption of Cu(II) ions would result in liver and kidney failures.11 Further, the excess amount of Cu(II) is highly lethal to microorganisms that are critical for a proper balance of an ecosystem. The Environmental Protection Agency (EPA) has stated that the highest permissible level of Cu(II) ions in drinking water must be less than 20 μM.12 Given this, great research interest has existed in recent years to develop practically useful sensor systems with superior sensing properties for selective detection and sensitive determination of Cu(II) ions.
In the past decades, the application of chemosensors in numerous fields has received great attention due to the exceptional achievements acquired in the design and development of fluorescent chemosensors for tracking metal ion concentration in the environment and biological systems with excellent selectivity and sensitivity.13,14 Other analytical techniques such as electrochemical detection, element analysis, inductively coupled plasma mass spectrometry (ICP-MS), spectrophotometry, and chromatography also gained remarkable accomplishments in metal sensing.15–18 Nevertheless, a few challenges still exist in these methods, which include low accuracy, inadequate qualitative ability, and expensive, laborious, and time-consuming instrumentation which have restricted the widespread applications of these methods. In light of this, fluorescence-based sensing has gained incredible attention in the area of metal sensing due to its unique features like being cost-effective, having superior sensitivity, quick sensing response, easy operation, and a non-invasive detection process.19,20
The basic paradigm for fluorescence chemosensors is fluorophore–spacer–receptor, in which the most commonly used fluorophores are anthracene, carbazole, fluorescein, rhodamine, boron-dipyrromethene (BODIPY), coumarin, and pyrene.21–25 Owing to the outstanding features such as facile synthesis, tunable structures and functions, and interesting photophysical properties including large Stokes shift, high photo-stability, relatively high quantum yield, and solvent-dependent emission characteristics, amino-1,8-naphthalimide (Nap) dyes have evolved as a favorite fluorophore and thus, a large number of fluorescence sensors have been developed and successfully employed for sensing different analytes.3,26,27 Amino-1,8-naphthalimides (Naps) are a classical heterocyclic ‘push–pull’ class of fluorophores that absorb and emit in the visible region. Nap derivatives are generally highly emissive due to the efficient internal charge transfer (ICT) transition from the amino group to the electron-deficient imide moiety.3,26 Moreover, the fluorescence emission intensity of Naps highly depends on the position of the amino group on the naphthalene unit. 3-Amino-based Naps are less emissive than 4-amino-based Naps due to the less efficient ICT transitions.28 In addition to the fluorescence sensing application, Naps have been used in various other applications including as fluorescent markers in biology, theragnostic agents, anticancer drugs, light-emitting diodes, electroluminescent materials, molecular logic gates, medicinal analgesics, fluorescence switches, liquid crystal displays, and organic photoconductive materials.24–27 Considering all these advantages, in recent years, a plethora of amino-1,8-naphthalimide (Nap)-based fluorescent chemosensors have been designed for efficient sensing of biologically relevant Cu(II) ions at low concentrations. The present review article provides a detailed report on the recent advances made in the use of Nap-based small-molecule chemosensors for fluorescence sensing and bioimaging of Cu(II) ions.
Fig. 1 (A) The structure of sensor Nap-1. (B) The observed changes in the fluorescence emission intensity of Nap-1 were induced by various metal ions in CH3CN. (C) The changes in fluorescence emission intensity of Nap-1 induced by the addition of Cu(II) (inset: corresponding photographs of visual color changes). (D) Photographs for fluorescence color change of Nap-1 in CH3CN in the presence of various metal ions. Reproduced with permission from ref. 29. Copyright 2017 Elsevier. |
A novel fluorescence chemosensor (Nap-2) based on an amino-1,8-naphthalimide having two [12]aneN3 species for Cu(II) detection was reported (Fig. 2A–E).30Nap-2 displayed an excellent 127-fold fluorescence quenching response with the incremental addition of Cu(II) ions and no notable inferences were seen with other competing metal cations including Ag(I), Cd(II), Ca(II), Fe(II), Co(II), Li(I), Hg(II), K(I), Ni(II), Mg(II), Na(I), Zn(II), and Pb(II) ions (Fig. 2B). The quantum yield of the Nap-2 + Cu(II) coordination complex was much lower (ϕ = 0.0014) compared to sensor Nap-2 (ϕ = 0.1498). Job's plot analysis confirmed that the binding stoichiometry between Cu(II) and Nap-2 was 2:1. The detection limit in aqueous media was estimated to be 1.3 × 10−8 M which was much lower than the permissible limit of Cu(II) ions in drinking water. The amino-1,8-naphthalimide moiety with no [12]aneN3 and triazole units exhibited no notable fluorescence alteration in the presence of Cu(II) ions. This data indicates that two [12]aneN3 units are crucial for effective complex formation. The combined effect of the triazole-[12]aneN3 unit and the amino-ester linkage resulted in the strong fluorescence quenching of Nap-2 when coordinated with the Cu(II) ion. The non-radiative decay induced by the close contact between the amino-1,8-naphthalimide moiety and Cu(II) ion might be the reason for the attenuation in the fluorescence intensity. In addition, the complex Cu(II) + Nap-2 could selectively detect adenosine triphosphate (ATP) which enhances the application of Nap-2 in the biological field. Further, due to the increased biocompatibility, high water solubility, and good sensitivity for Cu(II) sensing, Nap-2 was successfully used for the sequential sensing of Cu(II) and ATP both in an aqueous medium and within HeLa as well as A549 cells (Fig. 2D and E). The initial fluorescence intensity of Nap-2 was diminished significantly after the addition of Cu(II) ions due to the efficient coordination complex formation, which was decomposed by the addition of ATP. The fluorescence intensity of Nap-2 was restored by adding an increased concentration of ATP. At higher ATP concentrations, the HeLa and A549 cell lines exhibited a strong fluorescence emission and thus Nap-2 can be used as a potential chemosensor for sensing and bioimaging of Cu(II).
Fig. 2 (A) The structure of sensor Nap-2. (B) The observed relative changes in the fluorescence emission spectra of Nap-2 were induced by various metal ions. (C) The changes in fluorescence emission intensity of Nap-2 induced by the addition of Cu(II). (D) Confocal microscopy images of A549 and HeLa cells incubated with 10 μM Nap-2 and Nap-2 + Cu(II) for 1 h. (E) HeLa cells stained with 10 μM Nap-2 + Cu(II) upon the addition of increasing concentration of ATP. Reproduced with permission from ref. 30. Copyright 2016 Elsevier. |
In 2016, Liu et al. developed two interesting fluorescent sensors Nap-3 and Nap-4 for Cu(II) sensing (Fig. 3A and B) with the ability to display sharp visual color changes from yellow for Nap-3 to blue upon Cu(II) binding (Fig. 3C).31 The addition of Cu(II) ions into the Nap-3 solution in CH3CN/H2O resulted in the decrease in emission intensity at λ = 530 nm which is accompanied by an unusual fluorescence enhancement at λ = 440 nm when excited at λ = 365 nm. The sensing properties of these sensors were stable in a wide range of pH and the addition of several competing metal ions did not show any changes in emission spectra (Fig. 3B). The reason for the exceptional enhancement of fluorescence intensity was ascribed to the strong coordination of the S atom to Cu(II) which suppresses the excited state fluorescence quenching of the amino-1,8-naphthalimide moiety. The binding ratio and limit of detection were determined to be 1:1 and 0.0326 μM. Interestingly, the subsequent addition of Na2S reversed the fluorescence sensing through strong complex formation with Cu(II) ions. In addition to the fluorescence sensing, the ability of these sensors as cellular imaging probes was demonstrated using HeLa cells. The HeLa cells incubated with Nap-3 did not show any fluorescence emission, but the addition of Cu(II) induced bright fluorescence emission (Fig. 3D). To support the proposed sensing mechanism, a reference sensor molecule Nap-4 was designed, and similar titration studies were performed. Interestingly, the fluorescence titration showed significant fluorescence quenching with the appearance of no new peak, which suggested that “S” in Nap-3 strongly coordinates to form a stable complex and thus efficient sensing. Therefore, Nap-3 and Nap-4 can be viewed as excellent fluorescence turn-on sensors for selective sensing and bioimaging of Cu(II) ions.
Fig. 3 (A) The structure of sensor Nap-3 and Nap-4. (B) The relative changes in the fluorescence emission intensity of Nap-3 were induced by various metal ions. (C) Visual color changes for Nap-3 before and after binding with Cu(II) ions. (D) Fluorescence images of Hela cells incubated with Nap-3 only (left-a) and Nap-3 + Cu(II) for 1 h (right-b). Reproduced with permission from ref. 31. Copyright 2016 Elsevier. |
Another interesting Nap-based fluorescence sensor Nap-5 with a Schiff base receptor was reported.32Nap-5 is composed of a Nap fluorophore unit directly connected with the Schiff base receptor without the spacer. Nap-5 was highly fluorescent and displayed an excellent fluorescence quenching in the presence of Cu(II) ions in Tris-HCl buffer/DMF solution. The addition of other competing metal ions showed almost no observable changes in the emission intensity (Fig. 4A and B). The observed fluorescence quenching was due to the formation of a chelated, stable coordination complex between Nap-5 and Cu(II). From the titration studies, the association constant and LoD were calculated to be 1.088 × 106 M−1 and 0.32 μM, respectively. In continuation, the same group reported another interesting sensor Nap-6 with a slight modification at the receptor site.33 Similar to Nap-5, sensor Nap-6 also displayed an excellent fluorescence sensing ability for Cu(II), and no interference was observed in the presence of other competing ions at higher concentrations (Fig. 4C and D). The non-linear fitting curve and Job's plot analysis indicated that the binding ratio was 1:1 and the sensitivity of Nap-6 for Cu(II) was 0.23 μM. These results confirm the effective sensing properties of Nap-5 and Nap-6 towards Cu(II) ions.
Fig. 4 The mechanism of Cu(II) sensing for (A) Nap-5 and (C) Nap-6. The selectivity of the sensor (B) Nap-5 and (D) Nap-6 for Cu(II) ions in the co-existence of other competing metal ions. Reproduced with permission from ref. 32 and 33. Copyright 2017 Springer and 2017 Willey. |
A novel fluorescence sensor Nap-7 was designed by reacting 6-hydrazino-benzo[de]isoquinoline-1,3-diones with 4-tert-butyl-2,6-di-formyl phenol. Nap-7 displayed a highly selective 30-fold fluorescence quenching response for Cu(II) in CH3CN:H2O (4:1, v/v) solution (Fig. 5A).34 The high selectivity towards Cu(II) ions was not disturbed in the presence of other analytes including most of the alkali metals, alkaline earth metals and rare earth metals. The sensitivity was found to be as low as 64 ppb and this level of sensitivity is much lower than the allowed concentration of Cu(II) in water. The stoichiometry plot and ESI-MS analysis suggested that the binding ratio between Nap-7 and the Cu(II) ion was 1:2. Notably, further studies using different salts of the Cu(II) ion such as Cu(NO3)2, CuCl2, Cu(ClO4)2 and Cu(OAc)2 showed no changes in the emission intensity and thus, the effect of anions on the sensing property of Nap-7 was negligible. The observed fluorescence quenching was attributed to the photo-induced energy transfer from Nap-7 to the Cu(II) ion and the high selectivity of Nap-7 for Cu(II) was due to the strong affinity of heteroatoms (O and N) for Cu(II) and also to the ability of the Cu(II) ion to deprotonate the amide moiety. The selective fluorescence quenching for Cu(II) was also observed within the cellular medium (MCF-7 cells) with no apparent toxicity to the cell line (Fig. 5B). All these data affirm the excellent efficacy of Nap-7 to act as a Cu(II) sensing probe both in solution and in the biological medium.
Fig. 5 (A) The structure of sensor Nap-7 and its 1:2 complex formation with the Cu(II) ion in CH3CN–H2O solution. (B) The fluorescence microscopy image of Nap-7 within MCF-7 cells before and after the addition of Cu(II) ions. Reproduced with permission from ref. 34. Copyright 2016 Elsevier. |
In 2016, Zheng and his group reported a semicarbazide-based fluorescent sensor Nap-8, which showed a unique reaction-based turn-on fluorescence sensing towards Cu(II) ions.35 The sensor Nap-8 underwent a Cu(II) ion-promoted hydrolysis of the semicarbazide moiety into the formation of the corresponding amino-derivative which exhibited a strong fluorescence emission (see Fig. 6). The formation of the amino-derivative of Nap-8 was verified based on the absorption and emission spectra recorded after the addition of Cu(II) in a buffer solution. Both the absorption and emission spectra matched well with already reported data for the amino-derivative. The proposed hydrolysis-based sensing mechanism was further supported by the ESI-MS analysis. After the reaction of the Cu(II) ion with Nap-8 in buffer medium, an intense peak at m/z = 269.3 was observed which corresponds to the proposed amino-derivative of Nap-8. This was further confirmed by multinuclear NMR (1H and 13C) analysis. Interestingly, Nap-8 displayed an intense fluorescence enhancement even in the presence of other competing metal ions with excellent sensitivity and thus Nap-8 can be used as an efficient fluorogenic chemo-dosimetry probe for the trace analysis of Cu(II) ions.
Fig. 6 The proposed reaction-based sensing mechanism of Nap-8 for Cu(II) ions. The addition of Cu(II) induced hydrolysis to generate the amino-derivative of Nap-8. |
A novel fluorescence sensor (Nap-9) was synthesized via four-step reactions starting from 4-bromo-naphthalic anhydride.36 The developed probe Nap-9 displayed a highly selective and effective off–on type of fluorescence response for the addition of Cu(II) ions in CH3CN–H2O (70:30, v/v) along with a buffer solution of 3-(N-morpholino) propane sulfonic acid (MOPS, 10 mM, pH = 7.0) (Fig. 7A–C). The PET process from the electron-rich receptor moiety to the excited state of Nap-9 fluorophore species was quenched in the presence of Cu(II) ions which eventually lead to the enhancement of fluorescence intensity (Fig. 7A). The fluorescence enhancement efficiency did not alter upon changing the concentration of Cu(II) ions from 1 to 10 equivalents, which indicates the binding stoichiometry as 1:1. This binding ratio was further confirmed using Job's plot analysis. The association constant was calculated to be 1.1 × 1010 M−1 and the LoD was 0.15 μM. The 4.5 fold fluorescence enhancement for Nap-9 upon the addition of 10 equivalents of Cu(II) ion with no notable alteration with the presence of other metal analytes makes the sensor Nap-9 an effective probe for Cu(II) ions (Fig. 7B and C).
Fig. 7 (A) The structure of sensor Nap-9 before and after the complex formation with the Cu(II) ion. (B) The relative changes in emission intensity observed for Nap-9 after the addition of various metal ions and (C) their corresponding bar diagram showing the fluorescence turn-on response for the Cu(II) ion selectively. Reproduced with permission from ref. 36. Copyright 2013 Elsevier. |
Another interesting naphthalimide fluorescence sensor Nap-10 adorned with a di-(2-picolyl)amino (DPA) receptor unit was reported for the excellent sensing of Cu(II) ions (Fig. 8A).37 The absorption spectra of Nap-10 displayed a clear hypochromic shift with the addition of Cu(II) ions which leads to a naked eye color change from a yellow shade to colorless. Interestingly, other metal ions did not show any notable shift in the absorption peak of the sensor. Similarly, the fluorescence emission intensity of Nap-10 was altered significantly in the presence of Cu(II) ions. The initial strong emission of Nap-10 was attenuated upon the addition of Cu(II) ion solution and this was also reflected by a marked color change (Fig. 8C and D). The bright green emission of Nap-10 was observed to disappear after binding with the Cu(II) ion (Fig. 8C inset). The binding ratio between Nap-10 and Cu(II) was estimated to be 1:1 by Job's plot. The electron-donating DPA receptor promotes a strong push–pull type of mechanism to the electron-withdrawing imide site which facilitates the strong internal charge transfer (ICT) transition. Upon metal binding, the lone pairs of electrons in the DPA moiety are no longer available for an efficient ICT process thus leading to the suppression of ICT which eventually resulted in the quenching of fluorescence. The crystal structure of the Cu(II) + Nap-10 complex reveals the Cu(II) coordination to three different nitrogen atoms, two of which belong to the pyridine ring unit and the other nitrogen from the naphthalene ring unit (Fig. 8B). The crystal data also validate the 1:1 binding ratio. The geometry of the complexation was observed to be trigonal bipyramidal. This is the first example of the successful crystal structure of the di-2-picoly-amine (DPA)–Cu(II) complex.
Fig. 8 (A) The structure of sensor Nap-10 and (B) X-ray crystal structure of the 1:1 Cu(II) + Nap-10 complex. (C) The relative changes in emission intensity before and after the addition of different metal cations [inset: color changes observed for Nap-10 before and after the addition of Cu(II)]. (D) The changes in fluorescence emission intensity for Nap-10 upon the gradual addition of Cu(II) ions. Reproduced with permission from ref. 37. Copyright 2012 Elsevier. |
Tris-(2-aminomethyl)amine (tren) is a flexible amine used extensively in the design and synthesis of luminescent organic cages and organic polymers.38 Due to its facile protonation of NH2 groups, tren-based small-molecule fluorophores are water-soluble. In 2013, Gunnlaugsson et al. synthesized an interesting 4-amino-1,8-naphthalimide-based fluorescence sensor Nap-11 functionalized with a tren receptor moiety at the 4th position of the naphthalimide moiety (Fig. 9).39 The sensor Nap-11 exhibited an efficient and selective fluorescence quenching of up to 80% and a blue shift in the absorption band upon the addition of Cu(II) ions in 100 mM NaCl buffer solution. Further studies demonstrated that the fluorescence emission properties altered with a change in the pH of the solution. This is because the tren-receptor NH2 groups are involved in the PET process thereby quenching the fluorescence intensity in the basic pH. Meanwhile in acidic pH < 4, the NH2 groups are protonated which inhibits the PET process and thus enhances the fluorescence emission. The observed fluorescence changes in response to the change in pH of the medium were found to be fully reversible. At a highly acidic pH, the binding ratio between Cu(II) and Nap-11 was 1:2, but this ratio changed to a 1:1 at physiological pH. In addition to the excellent sensing characteristics, sensor Nap-11 can be easily recovered from the metal–sensor complex upon titrating with the chelating agent EDTA or glutathione.
Fig. 9 The changes in ICT-based fluorescence emission spectra of Nap-11 as a function of increasing concentration of Cu(II) upon excitation at λ = 445 nm (inset: the structure of sensor Nap-11). Reproduced with permission from ref. 39. Copyright 2013 Taylor and Francis. |
In 2019, Qian and team designed and synthesized a series of amino-1,8-naphthalimide-based fluorescence sensors (Nap-12 to Nap-15) for multiple applications, of which Cu(II) ion sensing is one of the main purposes (Fig. 10A).40 Upon screening the selectivity of these sensors towards various metal ions in the Tris-HCl buffer medium, the emission characteristics displayed an efficient and selective quenching for Cu(II) ions. The sensors Nap-12 to Nap-15 exhibited almost 116, 20, 12, and 14-fold quenching of emission intensity with the addition of 5-equivalents of Cu(II) ions, respectively. Interestingly, similar studies with other metal ions showed no notable fluorescence changes, except a one-fold emission enhancement observed for sensor Nap-14 upon the addition of Fe(III) ions. It was suggested that the possible reason for this is due to the peculiar structural features of Nap-14 compared to other sensors. Furthermore, the presence of a long hydrophobic chain as well as the carbonyl group attached to the 1,8-naphthalimide moiety restricted the PET process and thereby enhanced the fluorescence emission intensity. The detection limit of Nap-12 to Nap-14 was estimated to be 2.62 × 10−9, 4.51 × 10−9, and 1.17 × 10−8 M, and Job's plot confirmed the binding ratio between sensors and Cu(II) to be 1:2. The paramagnetic nature of Cu(II) ions and the effective coordination of the amino group towards Cu(II) ions leads to excellent fluorescence quenching properties. Along with Cu(II) sensing in a buffer medium, cellular imaging studies were also performed using HeLa cells. Sensors Nap-12 to Nap-15 were highly emissive within HeLa cells and the subsequent incubation of Cu(II) quenched the fluorescence emission (Fig. 10B). This was further extended to demonstrate the use of sensor-Cu(II) complexes to visualize them within the lysosomes in live HeLa cancer cell lines (Fig. 10C). All these studies demonstrated that triazole-based ligands Nap-12 to Nap-15 could be used as potential fluorescence sensors for the trace determination of Cu(II) both in the buffer medium and within the cancer cell lines.
Fig. 10 (A) The structure of sensors Nap-12 to Nap-15. (B) Confocal fluorescence microscopy images of HeLa cells treated with sensors Nap-12 to Nap-15 and then incubated with Cu(II) ions (the images were recorded at different times). (C) Fluorescence microscopy images of HeLa cells incubated with Nap-12 + Cu(II) and Nap-13 + Cu(II) complexes and Lyso-Tracker red for 0.5 h. Reproduced with permission from ref. 40. Copyright 2019 Frontiers. |
Another interesting fluorescence sensor was reported by Yoon and co-workers, who designed two different 4,5-disubstituted-1,8-naphthalimide sensors, Nap-16 and Nap-17, which showed excellent fluorescence sensing of Cu(II) (Fig. 11A).41 The fluorescence titration studies using Nap-16 and Nap-17 in HEPES buffer solutions (0.5 M, pH = 7.4) displayed unique alteration with the addition of Cu(II) ions. The broad emission peak of Nap-16 at λ = 534 nm decreased in intensity which was accompanied by the generation of a blue-shifted emission band at λ = 478 nm upon titrating with Cu(II) ions. These changes indicated the complexation of Cu(II) ions with sensor Nap-16. Job's plot confirmed a 1:1 binding ratio between Nap-16 and Cu(II) ions. The association constant was estimated to be 2.7 × 105 M−1 and the limit of detection was 1.0 × 10−8 M−1. Similarly, with the addition of Cu(II) ion solution, sensor Nap-17 displayed an efficient quenching pattern at λ = 550 nm, and the dissociation constant was calculated to be 2.2 × 10−6 M−1. Upon the interaction with the Cu(II) ion, the NH proton of Nap-17 gets easily deprotonated which facilitated the observed fluorescence quenching. The absorption spectra of Nap-17 showed a decrease in the band at λ = 459 nm and the generation of two different bands at λ = 306 and 504 nm which displayed sharp isosbestic points at λ = 390 and 492 nm, respectively. The hypsochromic shift in the fluorescence peak was due to the partial positive charge near the cation because of the interaction of the metal cation with the electron-rich moiety of the fluorophore. Therefore, Nap-16 can be a ratiometric sensor and Nap-17 a colorimetric sensor for Cu(II) ion detection. Moreover, the fluorescence sensing responses can be reversed by titrating with CN− ions, which breaks the coordination complex by forming an effective complex with the Cu(II) ion (Fig. 11B). This reversible switching was reflected by the color changes of both sensors. Therefore, both Nap-16 and Nap-17 can be utilized as possible reversible fluorescence and colorimetric sensors for the detection of Cu(II) ions.
Fig. 11 (A) The structure of sensors Nap-16 and Nap-17. (B) Reversible colorimetric responses of sensors Nap-16 and Nap-17 before and after mixing of CN− ions to their respective Cu(II) complexes. Reproduced with permission from ref. 41. Copyright 2010 Elsevier. |
A cleft-shaped sensor Nap-18 was developed by a simple naked-eye substitution reaction between N-butyl-4-bromo-5-nitro-1,8-naphthalimide and N-phenyl ethylenediamine yielding the expected sensor molecule in analytically pure form and high yield.42Nap-18 was successfully utilized for selective detection of Cu(II) ions, producing clear naked eye color changes (Fig. 12). The yellow color of Nap-18 changed to pink upon complex formation with Cu(II) ions. Notably, the fluorescence emission of Nap-18 was observed to be red-shifted from green to red upon binding with the Cu(II) ion (Fig. 12). It was suggested that the reason for the observed sharp color changes might be due to the Cu(II)-coordinated deprotonation of amine groups on the naphthalene ring. It was further proposed that the binding of Cu(II) with Nap-18 took place in a stepwise manner, first forming a 1:1 complex, then forming a 1:2 complex, and later rapidly releasing two amino protons from the naphthalimide moiety to form the 1:1 chelate complex of Nap-18 with Cu(II). The observed sharp visual color changes make Nap-18 a suitable colorimetric and ratiometric probe for Cu(II) ion sensing.
Fig. 12 The structure of sensor Nap-18 and its Cu(II) complex, and sharp visual changes from green to pink. Reproduced with permission from ref. 42. Copyright 2005 American Chemical Society. |
Spring et al. designed a unique ratiometric fluorescence sensor Nap-19 for Cu(II) detection by the incorporation of a piperazine ring into two N-butyl-4-acetamido-1,8-naphthalimide moieties (Fig. 13).43 Upon changing the polarity of the sensing medium from low to high, the piperazine ring of the sensor exhibited a conformational switching from chair to boat, leading to the transformation of 1,8-naphthalimide monomer emission at λ = 450 nm via a static excimer formation which emits at λ = 550 nm. Fluorescence emission intensity displayed no noticeable changes with the addition of less than one equivalent of Cu(II) ion, whereas the UV-vis spectra exhibited a notable decrease in peak intensity along with a red-shift as well as peak broadening when one equivalent of Cu(II) ion was added to the sensor solution. However, the second equivalent of Cu(II) ion addition resulted in an enhanced blue shift of the peak. The excited state of the naphthalimide dimer unit induces a dynamic excimer emission in polar solvents in their free state. However, upon complexation with the Cu(II) ion, the obtained complex exhibits a static excimer emission which originated from the ground state of the naphthalimide dimer formation. Further, the bathochromic shift of the excitation spectrum of the complex also validates the formation of the static excimer. In a nutshell, Nap-19 can be utilized as a ratiometric fluorescence probe for selective sensing of Cu(II) ions in an aqueous solution based on the excimer–monomer switching characteristics of the 1,8-naphthalimide moiety.
Fig. 13 The proposed Cu(II) sensing mechanism of excimer–monomer switching of sensor Nap-19 (inset: visual color changes of the sensor from green to blue after complexation with metal) in an aqueous medium. Reproduced with permission from ref. 43. Copyright 2010 Royal Society of Chemistry. |
Another interesting ratiometric Cu(II) sensor, Nap-20, was devised by linking 4-amino-1,8-naphthalimide and 8-aminoquinoline fluorophores through a piperazine linker unit (Fig. 14A).44 Due to the large spectral overlap, both these fluorophores were excited at the same wavelength. In the HEPES buffer medium, Nap-20 showed two strong absorption peaks, a peak centered at λ = 252 nm which corresponds to the π–π* transition, and an ICT-based transition peak at λ = 403 nm (Fig. 14B).
Fig. 14 (A) The structure of sensor Nap-20 and its Cu(II) complex. (B) The observed changes in the absorption spectra for Nap-20 after adding Cu(II) solutions (inset: the titration profile based on the absorbance at 252 nm). (C) The relative changes in the fluorescence emission intensity for Nap-20 upon mixing the Cu(II) ion solution (inset: the obtained titration profile based on the intensity ratio at 435 and 526 nm). (D) The confocal fluorescence image of MCF-7 cells treated with Nap-20 (above) and subsequent addition of Cu(II) ions (below) (labels a–h are part of the original images). Reproduced with permission from ref. 44. Copyright 2012 American Chemical Society. |
Interestingly, upon incremental addition of Cu(II) ions, Nap-20 showed a ratiometric response. The absorption intensity of the peak at 252 nm enhanced gradually while the peak at 403 nm slightly blue-shifted and the intensity of the peak was decreased. Similarly, the fluorescence emission spectrum of Nap-20 showed two intense peaks at λ = 435 and 526 nm; these emission peaks correspond to two different fluorophores of Nap-20. The increased addition of Cu(II) ions into the sensor solution induced selective quenching of the emission at 526 nm with no significant changes at 435 nm (Fig. 14C). The ratio between the two emission peaks demonstrated linearity up to 1:1 concentration of Nap-20 and Cu(II). It was noticed that the observed ratiometric fluorescence response was not altered by the presence of other competing metal cations. Further biological studies of live MCF-7 cell imaging indicated the use of Nap-20 as a potential ratiometric fluorescence sensor for trace monitoring the Cu(II) ion concentration within the cellular medium (Fig. 14D).
In 2014, Zhang et al. reported a unique Cu(II) ion sensor (Nap-21) based on an intramolecular fluorescence resonance energy transfer (FRET) mechanism using an amino-1,8-naphthalimide fluorophore which connected through a spacer with a rhodamine B fluorophore (Fig. 15A).45 The absorption peak of ring-opened rhodamine B at λ = 556 nm significantly overlaps with the emission spectrum of the amino-1,8-naphthalimide which emits at λ = 525 nm which engenders the sensor Nap-21 to exhibit FRET. The strong emission of Nap-21 emanating from the amino-1,8-naphthalimide moiety was quenched and a new emission peak at λ = 580 nm was observed in the presence of Cu(II) ions. The appearance of a new peak was assigned to the ring-opening of the spirolactam to form an amide. The detection limit was calculated to be 0.25 μM. Job's plot indicated the formation of a 1:1 metal–ligand coordination complex, which was further validated by ESI-MS analysis. The confocal microscopy images revealed the potential use of Nap-21 as a ratiometric Cu(II) sensor with high-level practical feasibility (Fig. 15B).
Fig. 15 (A) The structure of sensor Nap-21 and its Cu(II) complex. (B) The confocal fluorescence images of RAW cells treated with Nap-21 (top panel) and cells incubated with Nap-21 and Cu(II) (bottom panel) (labels a–f are part of the original images). The rightmost images are bright-field images. Reproduced with permission from ref. 45. Copyright 2014 Royal Society of Chemistry. |
Two structurally similar fluorophore–spacer–receptor types of sensors Nap-22 and Nap-23 were configured based on 4-amino-2,2,6,6-tetramethyl piperidinyl for fluorescence sensing of Cu(II) ions (Fig. 16).46 Among the various metal ions tested Pb(II), Zn(II), and Ni(II), the highest fluorescence enhancement was measured for Cu(II) ions. The fluorescence titration profile indicated a 1:1 complex formation of the sensor with Cu(II) ions. It was proposed that the Cu(II) ions coordinated with both the piperidine moiety and the aromatic amine site which resulted in the restriction of the PET process from the amine receptor site to the 1,8-naphthalimide moiety. Subsequently, the inhibition of PET resulted in an efficient fluorescence enhancement. In addition to the emission enhancement, the chelation of the sensor led to the hypsochromic shift in wavelength due to the reduction in the electron-donating ability of aromatic amine. These studies demonstrated the ability of Nap-22 and Nap-23 as efficient fluorescence switches for excellent sensing of Cu(II) ions. These studies were further explored by the same group and in continuation, two more sensors Nap-24 and Nap-25 with similar sensing properties were reported (Fig. 16).47 Sensors Nap-24 and Nap-25 were weakly emissive due to the PET process which quenches the intrinsic emission of sensors. But, the coordination of Cu(II) ions with sensors engenders an efficient emission increase due to the prevention of the PET process. Besides Cu(II) sensing, the fluorescence switching of these sensors based on H+ ion concentrations in solution was demonstrated.
Fig. 16 The structures of sensors Nap-22 to Nap-25 employed for selective and efficient sensing of Cu(II) ions. |
In 2014, Xu and team designed a novel 4-amino-1,8-naphthalimide-based fluorescence sensor Nap-26 consisting of the morpholine moiety as a receptor site for Cu(II) binding (Fig. 17A).48Nap-26 exhibited an efficient fluorescence turn-on sensing response for the Hg(II) ion and a fluorescence turn-off response for Cu(II) in aqueous solution (Fig. 17B). Notably, the observed fluorescence changes gave a linear curve with increasing concentration of metal ions, and the efficient fluorescence quenching in the presence of Cu(II) was attributed to the heavy atom effect (Fig. 17C). Therefore, Nap-26 can be a potential bifunctional sensor system for the quantification of metal-ion concentrations in solutions.
Fig. 17 (A) The structure of sensor Nap-26 and its Cu(II) coordination complex. (B) The relative changes in fluorescence emission for Nap-26 in the presence of different metal cations. (C) The observed changes in emission intensity upon the gradual addition of Cu(II) ion solution. Reproduced with permission from ref. 48. Copyright 2014 Royal Society of Chemistry. |
In 2007, Fu et al. reported a novel two-channel fluorescence sensor Nap-27 designed from macrocyclic dioxotetramine, which acts as a receptor and amino-1,8-naphthalimide (Fig. 18A).49 The initial emission intensity of Nap-27 was perturbed upon the addition of Cu(II) and Hg(II) metal ions, while other metal ions showed almost no changes in the emission spectra of Nap-27 (Fig. 18B). From the titration profile, the limit of detection was found to be 3 × 10−7 M for Cu(II) and 7 × 10−7 M for Hg(II). The observed photophysical changes were also reflected by sharp visual color changes (Fig. 18C). Therefore, Nap-27 can be utilized as a potential visual and optical sensor for the trace sensing of both Cu(II) and Hg(II) even in the presence of other competing metal cations.
Fig. 18 (A) The structure of sensor Nap-27 and (B) visual color changes were observed for Nap-27 before and after mixing with different metal ion solutions. (C) Relative changes in emission intensity upon the addition of various metal ions. (D) The fluorescence titration studies for Nap-27 at different concentrations of Cu(II) ion solution (inset: a plot of fluorescence changes vs. equivalents of Cu(II) ion). Reproduced with permission from ref. 49. Copyright 2007 Elsevier. |
In this article, we have exemplified various examples of Nap-based small-molecule fluorescence chemosensors reported to date for the selective sensing and bioimaging of Cu(II) ions. The fluorescence sensing properties of different sensors highlighted in this article are presented in Table 1. We have discussed in detail the photophysical properties, the mode of binding, the fluorescence sensing mechanism, and the bioimaging applications of several sensors for the detection of Cu(II) ions. Gratifyingly, a few of the Nap sensors presented in this article exhibited excellent chemical stability under various experimental conditions and high selectivity for selective sensing of Cu(II) even in competitive environments. Hence, Nap-based fluorescence sensors have unlimited potential to be used as fluorescence sensors for sensing and bioimaging Cu(II) ions. However, there are multiple issues with Nap sensors exemplified in this article and these issues must be resolved for developing practically useful fluorescence sensor systems. Most of the Nap sensors reported to date are either fully water-insoluble or partially soluble in water and thus they are not biocompatible. Moreover, the fluorescence sensing studies of Nap sensors were largely performed in an organic solvent or in a mixture of organic solvent and H2O medium, which limits their bio-imaging applications. Therefore, developing water-soluble Nap fluorescence sensors for Cu(II) sensing is imperative.
Structure of sensor | Emission maxima, λmax (nm) | Sensing medium | Selectivity | K SV or Ka | Sensitivity/LoD | Sensing mechanism/fluorescence responses | Ref. |
---|---|---|---|---|---|---|---|
Nap- 1 | 542 | CH3CN | Cu(II) | 3.13 × 104 L mol−1 | 2.4 × 10−6 mol L−1 | Inhibition of ICT/turn-off | 29 |
Nap- 2 | 541 | Tris-HCl buffer | Cu(II) | — | 1.3 × 10−8 M | Non-radiative decay/turn-off | 30 |
Nap- 3 | 530 | CH3CN/H2O | Cu(II) | — | 0.0326 μM | Suppression of excited quenching/turn-on | 31 |
Nap- 4 | — | CH3CN/H2O | Cu(II) | — | — | Suppression of excited quenching/turn-on | 31 |
Nap- 5 | 539 | Tris-HCl buffer | Cu(II) | 1.088 × 106 M−1 | 0.32 μM | —/turn-off | 32 |
Nap- 6 | 532 | DMSO–HEPES buffer | Cu(II) | 1.14 × 106 M−1 | 4.67 × 10−8 M | —/turn-off | 33 |
Nap- 7 | 560 | CH3CN/H2O | Cu(II) | 1.58 ± 0.45 × 109 M−2 | 64 ppb | PET/turn-off | 34 |
Nap- 8 | 532 | Buffer water/CH3CN | Cu(II) | — | 5.2 × 10−8 mol L−1 | Cu(II) ion-promoted hydrolysis/turn-on | 35 |
Nap- 9 | 519 | CH3CN/H2O | Cu(II) | 1.1 × 1010 M−1 | 0.15 μM | Inhibition of PET/turn-on | 36 |
Nap- 10 | 527 | CH3CN/H2O | Cu(II) | 4.5 × 104 M−1 | — | Suppression of ICT/turn-off | 37 |
Nap- 11 | 545 | Buffered 100 mM NaCl solution | Cu(II) | logβ2:1 = 6.46 (±0.08) and logβ1:1 = 6.23 (±0.11) | — | PET/turn-off | 39 |
Nap- 12 | 541 | Tris-HCl buffer | Cu(II) | — | 2.62 × 10−9 M | Restricted PET process/turn-on | 40 |
Nap- 13 | 546 | Tris-HCl buffer | Cu(II) | — | 4.51 × 10−9 M | Restricted PET process/turn-on | 40 |
Nap- 14 | 540 | Tris-HCl buffer | Cu(II) | — | 1.17 × 10−8 M | Restricted PET process/turn-on | 40 |
Nap- 15 | 536 | Tris-HCl buffer | Cu(II) | — | — | Restricted PET process/turn-on | 40 |
Nap- 16 | 534 | HEPES buffer | Cu(II) | 2.7 × 10−5 M−1 | 1.0 × 10−8 M | NH-deprotonation/turn-off | 41 |
Nap- 17 | 550 | HEPES buffer | Cu(II) | 2.2 × 10−6 M−1 | 1.0 × 10−9 M | NH-deprotonation/turn-off | 41 |
Nap- 18 | 518 | Ethanol–H2O | Cu(II) | — | — | Cu(II)-coordinated deprotonation/shift-in wavelength | 42 |
Nap- 19 | 450 | CH3CN/HEPES buffer | Cu(II) | 2.94 × 105 M−1 | — | Excimer–monomer switching/wavelength shift | 43 |
Nap- 20 | 526 | HEPES buffer | Cu(II) | 2.9 × 104 M−1 | — | Ratiometric fluorescence sensing/turn-off | 44 |
Nap- 21 | 525 | Ethanol/H2O | Cu(II) | — | 0.25 mM | FRET/turn-off | 45 |
Nap- 22 | 541 | H2O/DMF | Cu(II), Pb(II), Zn(II), Ni(II) and protons | — | — | Inhibition of PET/turn-on | 46 |
Nap- 23 | 542 | H2O/DMF | Cu(II), Pb(II), Zn(II), Ni(II) and protons | — | — | Inhibition of PET/turn-on | 46 |
Nap- 24 | 539 | DMF and H2O | Cu(II), Pb(II), Zn(II), Ni(II), Co(II) and protons | — | — | Inhibition of PET/turn-on | 47 |
Nap- 25 | 534 | DMF and H2O | Cu(II), Pb(II), Zn(II), Ni(II), Co(II) and protons | — | — | Inhibition of PET/turn-on | 47 |
Nap- 26 | 529 | HEPES buffer | Cu(II), Hg(II) | 3.51 × 106 M−1 | — | Heavy atom effect/turn-off | 48 |
Nap- 27 | 538 | H2O/CH3OH | Cu(II), Hg(II) | 10074 M−1 | 3 × 10−7 M | —/turn-off | 49 |
One feasible method to enhance the water solubility of Nap derivatives is to functionalize the sensors with water-soluble organic ligands. In light of this, Gunnlaugsson et al. have synthesized a Nap-based fluorescence sensor functionalized with tris(2-aminoethyl)amine (TREN) chelating amine, which enhanced the water solubility of Nap sensors and also acts as a receptor site forming a stable coordination complex with metal cations.39 One such example is sensor Nap-11 substituted with the TREN ligand at the imide site, which was found to be fully soluble in water and forms a stable 2:1 selective coordination complex with Cu(II) ions in water. In this direction, further work is in progress in our group for developing biocompatible and practically useful Nap-based fluorescence sensors for sensing and bioimaging of biologically relevant metal cations.
As alluded to above, Nap derivatives are strongly colored and they absorb and emit in the visible region. For in vivo bioimaging applications, sensors with fluorescence emission in the red and near-infrared region are highly preferable. Therefore, further structure and functional modifications of Nap-based sensors are essential for real-time sensing and imaging of Cu(II) within biological systems. Another issue with Nap sensors is their poor sensitivity for target analyte detection. Compared to conjugated polymer-based fluorescence sensors, discrete small-molecule fluorophores have less sensitivity because of their stochiometric binding with target analytes. Most of the Nap sensors discussed herein sense Cu(II) ions at higher levels than the permissible concentrations of metal cations in groundwater and biological systems. The sensitivity of Nap-based small molecule fluorescence sensors can be improved by connecting discrete fluorophores into supramolecular polymeric sensors via a molecular self-assembly process. This can be achieved by attaching self-assembling functional groups such as COOH, OH, and NH2 on the periphery of the Nap unit.50 The supramolecular self-assembly is a promising one-step synthetic method used to design the targeted products in quantitative yield.51 Recently, this strategy has been successfully used to develop various supramolecular polymeric fluorescence sensors for the sensitive detection of secondary chemical explosives.1 The enhanced sensitivity is ascribed to the molecular wire effect, where the fluorescence quenching is communicated via long-range excitonic migration along the polymeric chains. Therefore, Nap derivatives can be used as a lead compound to develop fluorescence sensors with superior sensitivity by functionalizing the Nap core moiety with desired substituents.
Another issue with Nap-based sensors is their poor photostability. Nap-derivatives are known to form strong intermolecular π–π stacking interactions between the adjacent units, which in general results in self-quenching of intrinsic fluorescence emission due to the aggregation-caused quenching (ACQ) effect.52,53 The photostability of Nap derivatives can be improved by introducing bulky substituents on the periphery of Nap units. The bulky substituents can prevent molecular aggregation and thus retain the intrinsic fluorescence emission of Nap fluorophores. The photostability also can be enhanced by immobilizing the Nap fluorophores within the polymer-based matrixes like molecularly imprinted polymers having appropriate internal cavities for guest encapsulation. Furthermore, the high selectivity of Nap sensors for Cu(II) detection can be achieved by sensibly altering the receptor cavity size to match the size of Cu(II) ions.
In summary, we believe that this review conveys the advantages of Nap-based sensors in fluorescent sensing and the importance of Cu(II) sensing and bioimaging applications. We also hope that this review article will be useful to researchers working in related areas and encourage new ideas for the design of reliable chemosensors for Cu(II) detection in the future.
Footnote |
† These authors contributed equally. |
This journal is © The Royal Society of Chemistry 2023 |