Issue 6, 2012

Eco-friendly synthesis of carbon fiber precursor polymers and their molecular characteristics

Abstract

Carbon fiber precursor polymers such as poly[acrylonitrile-co-itaconic acid], poly[acrylonitrile-co-acrylamide] copolymers were synthesized through green chemistry routes i.e., via solid phase polymerization without using solvents, employing aqueous soluble inorganic metal salts as template compounds. The composition and the average molecular weights, such as the number average molecular weight (Mn), viscosity average molecular weight (Mv), weight average molecular weight (Mw) and size average molecular weight (Mz), were determined. The molecular weight distributions were evaluated by the Mv : Mn ratios estimated from the viscosity and osmotic measurements, and the Mw/Mn values were estimated from size exclusion chromatography (SEC-LALLS). The molecular weight distributions of these polymers, as determined from Mv/Mn and Mw/Mn, were 2.1 to 3.2 and 2.1 to 2.5 respectively. The molecular parameters [Mn (4.7 × 104), Mv (1.64 × 105), Mw (1.17 × 105) g mol−1] are comparable to those obtained through suspension [Mn (4.25 × 104), Mv (2.09 × 105), Mw(1.82 × 105) g mol−1] and solution [Mn (4.28 × 104), Mv (1.61 × 105), Mw(1.43 × 105) g mol−1] polymerization processes (conventional). The dispersity of the polymer spinning solution was also investigated using a parallel plate viscometer which confirms the homogeneity of the solution.

Graphical abstract: Eco-friendly synthesis of carbon fiber precursor polymers and their molecular characteristics

Article information

Article type
Paper
Submitted
20 Jan 2012
Accepted
05 Apr 2012
First published
05 Apr 2012

Green Chem., 2012,14, 1778-1785

Eco-friendly synthesis of carbon fiber precursor polymers and their molecular characteristics

G. S. Krishnan, A. Burkanudeen, N. Murali and H. Phadnis, Green Chem., 2012, 14, 1778 DOI: 10.1039/C2GC35098J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements