Issue 42, 2019

The effect of Ag alloying of Cu2(Zn,Cd)SnS4 on the monograin powder properties and solar cell performance

Abstract

Cation substitution in Cu2ZnSn(S,Se)4 offers a path to improved solar cell device performance through the modification of the structural, optical and electrical properties of the absorber material. In the present study, the effect of partial substitution of copper with silver in Cu1.85(Zn0.8Cd0.2)1.1SnS4 monograin powders was investigated. (Cu1−xAgx)1.85(Zn0.8Cd0.2)1.1SnS4 (ACZCTS) monograin powders with different ratios of [Ag]/([Cu] + [Ag]) were synthesized from CuS, Ag2S, ZnS, CdS, SnS and elemental sulfur in the liquid phase of KI as the flux material in evacuated quartz ampoules at 740 °C. EDX analysis of the as-grown materials in the entire series revealed that the Ag concentration was different in the synthesized materials than in the corresponding precursor mixtures. Furthermore, the Ag concentration at the surface of crystals was found to be higher than in the bulk of crystals. By increasing the input Ag content, the shape of grown crystals changed from sharp edged tetragonal to a more rounded form. Raman spectra showed a shift in the A peak position from 336 to 334 cm−1 as the Ag content increased in (Cu1−xAgx)1.85(Zn0.8Cd0.2)1.1SnS4. The changes in the recombination processes were studied by temperature dependent photoluminescence spectroscopy and current–voltage characteristics analysis. It was found that the acceptor concentration in the absorber can be modified by varying the Ag content in ACZCTS. The incorporation of Ag into the Cu1.85(Zn0.8Cd0.2)1.1SnS4 monograin absorber material improved the efficiency of monograin layer solar cells from 6.62% (x = 0) to 8.73% (x = 0.01).

Graphical abstract: The effect of Ag alloying of Cu2(Zn,Cd)SnS4 on the monograin powder properties and solar cell performance

Supplementary files

Article information

Article type
Paper
Submitted
17 Jul 2019
Accepted
06 Oct 2019
First published
08 Oct 2019

J. Mater. Chem. A, 2019,7, 24281-24291

The effect of Ag alloying of Cu2(Zn,Cd)SnS4 on the monograin powder properties and solar cell performance

K. Timmo, M. Altosaar, M. Pilvet, V. Mikli, M. Grossberg, M. Danilson, T. Raadik, R. Josepson, J. Krustok and M. Kauk-Kuusik, J. Mater. Chem. A, 2019, 7, 24281 DOI: 10.1039/C9TA07768E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements