Dan Sun*a,
Xinyuan Wana,
Wenzong Liub,
Xue Xiab,
Fangliang Huangc,
Aijie Wang*b,
Jessica A. Smithd,
Yan Dange and
Dawn E. Holmesf
aOcean College, Zhejiang University, Zhoushan 316021, P. R. China. E-mail: dsun@zju.edu.cn
bKey Laboratory of Environmental Biotechnology, Research Center for Eco-Environmental Sciences, China Academy of Sciences, Beijing 100084, P. R. China. E-mail: ajwang@rcees.ac.cn
cCollege of Life Sciences, Zhejiang University, Hangzhou 310058, P. R. China
dDepartment of Biomolecular Sciences, Central Connecticut State University, 1615 Stanley Street, New Britain, CT 06050, USA
eBeijing Key Laboratory for Source Control Technology of Water Pollution, Engineering Research Center for Water Pollution Source Control and Eco-remediation, College of Environmental Science & Engineering, Beijing Forestry University, 35 Tsinghua East Road, Beijing 100083, China
fDepartment of Physical and Biological Sciences, Western New England University, 1215 Wilbraham Rd, Springfield, MA 01190, USA
First published on 19th August 2019
Geobacter anodireducens is unique in that it can generate high current densities in bioelectrochemical systems (BES) operating under high salt conditions. This ability is important for the development of BES treating high salt wastewater and microbial desalination cells. Therefore, the genome of G. anodireducens was characterized to identify proteins that might allow this strain to survive in high salt BES. Comparison to other Geobacter species revealed that 81 of its 87 c-type cytochromes had homologs in G. soli and G. sulfurreducens. Genes coding for many extracellular electron transfer proteins were also detected, including the outer membrane c-type cytochromes OmcS and OmcZ and the soluble c-type cytochrome PgcA. G. anodireducens also appears to have numerous membrane complexes involved in the translocation of protons and sodium ions and channels that provide protection against osmotic shock. In addition, it has more DNA repair genes than most Geobacter species, suggesting that it might be able to more rapidly repair DNA damage caused in high salt and low pH anode environments. Although this genomic analysis provides invaluable insight into mechanisms used by G. anodireducens to survive in high salt BES, genetic, transcriptomic, and proteomic studies will need to be done to validate their roles.
MFCs rely on microorganisms that colonize the anode to transfer electrons from the oxidation of organic matter. MFC technology has been developed for a variety of bioelectrochemical system (BES) applications including hydrogen production,4 desalination,5 organic product synthesis,6 biosensors,7–9 and wastewater treatment.10 The study of EET by exoelectrogens has resulted in the development of the novel sub-discipline, electromicrobiology.11–13 However, mechanisms used to transfer electrons from a microorganism's cytoplasm out to extracellular electron acceptors like anodes still remains an area of controversy. Therefore, identification and characterization of microbes that are superior in their EET capabilities is essential for understanding the EET mechanisms favored in the environment and for practical applications.
Mechanisms for EET have been most thoroughly studied in the genera Geobacter and Shewanella.14 The model exoelectrogenic Shewanella species, S. oneidensis, uses a single known pathway to transfer electrons from an inner membrane cytochrome (CymA) to the MtrCAB porin-multiheme c-type cytochrome complex.15 The Mtr proteins directly reduce flavins, which can act as soluble electron shuttles.16 Approximately 75% of EET by S. oneidensis results from electron shuttles, which allows it to produce current in MFCs even though it cannot form thick biofilms.17–19 Geobacter species, on the other hand, form very thick biofilms, and a recent study showed that G. sulfurreducens produced 1047% times more maximum current than S. oneidensis.20
Geobacter spp. are the most abundant microorganisms in anaerobic soils and sediments where microbial reduction of insoluble Fe(III) oxides is important.1 To date, a total of 21 Geobacter species have been characterized (NCBI Taxonomy browser). Nearly all of the research regarding mechanisms of EET by Geobacter has been conducted in G. sulfurreducens strain PCA because it was the first to have a genome sequence, it can be genetically manipulated, and its metabolic traits such as rapid growth with fumarate as the electron acceptor make it easy to cultivate in the lab.21,22 However, G. sulfurreducens is not the most environmentally representative strain as it does not reduce Fe(III) oxides or produce current as effectively as some other Geobacter species23–27 and it rarely shows up in environmental samples.3
Although it is apparent that Geobacter species do not use soluble flavin shuttles like Shewanella, there does not seem to be one single pathway for EET amongst the genus. All Geobacter genomes sequenced to date appear to have genes that code for abundant multiheme c-type cytochromes and electrically conductive type IV pili (e-pili).28–30 However, specific mechanisms used for EET seem to vary between species and even among strains of the same species.31–33 For example, the soluble extracellular c-type cytochrome PgcA is required for Fe(III) oxide reduction in some strains of G. sulfurreducens34 and in the absence of e-pili,32 but it is not significant in other strains.35 In addition, OmcS facilitates electron transfer to Fe(III) oxide33 and anodes with thin biofilms formed by G. sulfurreducens,36 while a different c-type cytochrome, OmcZ, is involved in EET in thick anode biofilms.37,38 G. metallireducens does not have OmcS, although several other c-type cytochromes as well as e-pili are essential for EET.32,39,40 Furthermore, some Geobacter strains that are capable of Fe(III) oxide reduction, are completely incapable of current generation. For example, G. bemidjiensis contains both e-pili and a c-type cytochrome in the OmcZ family, however it is not able to produce current.23,41
Geobacter anodireducens was the first Geobacter species isolated from an anode biofilm based on its ability to generate current.26 In cyclic voltammetry, electrochemical impedance spectroscopy, and biomass tests, G. anodireducens SD-1 performed better than G. sulfurreducens PCA, G. metallireducens GS-15, and a mixed culture (wastewater). Current production was even greater in BESs operating with high salt concentrations.42 Geobacter anodireducens SD-1 will be useful for providing additional insights into superior EET mechanisms and current generation in BESs. As more is learned, development of various new BES technologies can emerge. In this study, the genome of G. anodireducens SD-1 was analyzed and compared to genomes from closely related Geobacter species that are also able to generate current in MFCs in order to identify genes that might lead to the enhanced EET capabilities of SD-1.
Electrical activities of SD-1, PCA, and GS-15 were tested in mini-BESs (5 ml) with graphite plate anodes and stainless steel mesh cathodes as previously described.42,44 Microbial electrolysis cell (MEC) chambers were filled with either 50 mM phosphate buffer (PBM-50), 200 mM phosphate buffer (PBM-200), or saline water (SW, 50 mM PBS with 3.8% NaCl) and 1 g L−1 sodium acetate was provided as the electron donor. Reference electrodes (Ag/AgCl; +200 mV vs. standard hydrogen electrode (SHE); BASi) were used to record anode and cathode potentials. An applied potential of 0.7 V was supplied to each MEC. MECs were operated with a programmable power supply (model 3645A; Circuit Specialists Inc), and each circuit contained a 10 Ω resistor.
Voltage was recorded at 20 minute intervals with a multimeter (model 2700; Keithley Instruments Inc.), and current was calculated using Ohm's law (I = V/R). Volumetric current density (IV; A m−3) was determined by dividing current by liquid volume, and current density per area (IA; A m−2) was calculated by dividing current by anode surface area.
Fe(III) reduction was monitored by measuring Fe(II) that could be extracted in 0.5 M HCl after a 1 hour incubation with a ferrozine assay at an absorbance of 562 nm as previously described.45
Preliminary annotation was performed using Rapid Annotation Subsystem Technology (RAST)46 and NCBI. SignalIP v4.1 was used to identify genes with signal peptides, and THMMER 2.0 was used to define genes with transmembrane helices.47,48 Translated amino acids were assigned to Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways using KASS (KEGG Automatic Annotation Server).49
The physiologies of G. anodireducens and G. soli also appear to be quite similar (Table 1). Both strains can couple the oxidation of acetate with a variety of extracellular electron acceptors including Fe(III), S0, Mn(IV), and AQDS, and neither strain can respire fumarate. However, G. soli can grow with nitrate provided as an electron acceptor,27 while G. anodireducens cannot couple the oxidation of organic compounds with nitrate respiration.26
Characteristic | SD-1 | PCA | GS-15 | GSS01 |
---|---|---|---|---|
a ND: not determined. | ||||
Acetate (electron donor) | Yes | Yes | Yes | Yes |
Hydrogen (electron donor) | Yes | Yes | No | ND |
Ferric citrate (electron acceptor) | Yes | Yes | Yes | Yes |
Fumarate (electron acceptor) | No | Yes | No | No |
Nitrate (electron acceptor) | No | No | Yes | Yes |
Sulfur (electron acceptor) | Yes | Yes | No | Yes |
Mn(IV) (electron acceptor) | Yes | Yes | Yes | Yes |
AQDS (electron acceptor) | Yes | Yes | Yes | Yes |
MFC anode (electron acceptor) | Yes | Yes | Yes | Yes |
NaCl tolerance | 3.0% | 1.7% | 0.5% | ND |
Presence of plasmid | Yes | No | Yes | No |
G. anodireducens and G. soli are both much more similar to G. sulfurreducens than to G. metallireducens. Pairwise ANI values from comparisons of G. anodireducens to G. sulfurreducens and G. metallireducens were 93.10 and 78.65, respectively. Similar to most members of the genus Geobacter, all four strains can utilize both soluble and insoluble Fe(III) as the sole electron acceptor coupled with the oxidation of acetate,25–27,53 and are capable of producing current on the anode of MFCs (Table 1).11,26,54
Geobacter anodireducens shares some physiological traits with both G. sulfurreducens and G. metallireducens. All three species can grow with a number of insoluble extracellular electron acceptors including current-harvesting anodes, Fe(III), Mn(IV), and AQDS (Table 1).25,26,35,53 However, among the three species only G. anodireducens and G. sulfurreducens can grow with elemental sulfur provided as an electron acceptor.25,26 Fumarate is a soluble electron acceptor that can only be used by G. sulfurreducens,25 while nitrate is a soluble electron acceptor that can only be utilized by G. metallireducens.53 Another important difference between these strains is that G. anodireducens is much more salt tolerant compared to the other two strains.42 Similar to G. metallireducens, a plasmid was identified in the G. anodireducens genome.
In terms of environmental niche, G. anodireducens SD-1 survived at pH and temperature ranges similar to those of G. metallireducens and G. sulfurreducens.25,26,53 However, SD-1 was able to grow with up to 3% NaCl,26 which is significantly higher than G. sulfurreducens and G. metallireducens which could only tolerate 1.7% NaCl25 and 0.5% NaCl,53 respectively. Furthermore, SD-1 generated significant current in BES with 200 mM phosphate buffer and 650 mM NaCl, while neither G. sulfurreducens nor G. metallireducens could grow in the high salt solution and both were significantly impaired in 200 mM phosphate solutions (ESI Fig. S1B†).42 Salt concentrations have been shown to influence microbial metabolism in MFCs and a recent study demonstrated that NaCl concentrations should remain below 0.1 M for optimal electricity generation.55 SD-1's ability to withstand such high salt concentrations will make the strain useful in future application of microbial desalination cells and microbial reverse electrodialysis cells56 as well as BES used for bioremediation of high salt solutions.57
Total number of bases | Number of genes | % G + C | |
---|---|---|---|
SD-1 chromosome | 3555507 | 3434 | 61.8% |
SD-1 plasmid | 110507 | 130 | 52.2% |
GSS01 chromosome | 3657100 | 3388 | 61.8% |
PCA chromosome | 3814128 | 3711 | 60.9% |
GS-15 chromosome | 3997420 | 3617 | 59.5% |
GS-15 plasmid | 13762 | 18 | 52.5% |
The Function Category Comparison tool on the IMG/MER website was used to classify genes from various COG pathways in the four different genomes (ESI Table S1†). The comparison revealed that both the G. anodireducens and G. soli genomes have genes coding for two ATP synthase complexes, the F- and V-type ATPases. The only other Geobacter species that have both ATPase complexes are G. uraniireducens and Geobacter sp. M18.58 The F-type ATPase complex is found in most bacteria, eukaryotic mitochondria, and chloroplasts58–60 while the V-type complex is found in archaea, a few bacteria, and eukaryotic vacuoles.58,61–63 Studies have found that both of these ATPases can translocate protons or sodium ions across the membrane to drive the synthesis or hydrolysis of ATP.58,59,63 Analysis of subunit c from the F- and V-type ATPase complexes revealed that neither appears to have Na+-binding sites,58 suggesting that both of these ATPase complexes are proton-dependent.
Another difference among these genomes is the presence of genes for a multisubunit NA+/H+ antiporter in G. anodireducens, G. soli, and G. sulfurreducens, but not G. metallireducens. There are 7 Mrp (multiple resistance and pH) subunits (MrpA-G) required for enzymatic activity64 and G. anodireducens has genes for all 7 of these subunits (Ga0133348_111263–Ga0133348_111270). The Mrp complex is a Na+/H+ antiporter that utilizes the proton motive force to efflux intracellular sodium ions, and its functions include sodium tolerance and pH homeostasis.65–68 This complex is likely to be important for the high salt tolerance of G. anodireducens.42
An additional notable difference is that the number of fatty acid metabolism genes is significantly higher (∼3 times) in the G. metallireducens genome than the other three genomes. This can be explained by the fact that G. metallireducens is able to utilize a number of aromatic hydrocarbons (i.e. benzoate, toluene, phenol, p-cresol, benzene) as electron donors53,69 and these pathways share many genes with the fatty acid degradation pathway.70–72
Fig. 1 Identification of genes that code for proteins from the tricarboxylic acid (TCA) cycle in the G. anodireducens SD-1 genome. |
Similar to G. metallireducens, neither G. anodireducens nor G. soli are capable of growth with fumarate provided as the electron acceptor.26,27 Both of these organisms have genes that code for a succinate dehydrogenase complex which also functions as a respiratory fumarate reductase in G. sulfurreducens; Ga0133348_112411–112413 in G. anodireducens and Ga0077628_111869–111871 in G. soli (Fig. 2). However, their genomes lack the gene that codes for the anaerobic C4-dicarboxylate transporter (dcuB), which is required for the transport of aspartate, malate, fumarate, and succinate by many bacterial species.73–75 When the dcuB gene from G. sulfurreducens is expressed on a vector introduced into G. metallireducens, fumarate respiration is possible.76 It is likely that both of these strains would also be able to respire fumarate if the G. sulfurreducens dcuB gene was introduced into their chromosomes.
The respiratory nitrate reduction pathway has been characterized in G. metallireducens and genes for the nitrate reductase complex (narGYJI) and the nitrate/nitrite antiporter (narK) have been identified.24 Analysis of the other three genomes did not reveal the presence of any genes that code for proteins involved in nitrate respiration. This is consistent with the fact that neither G. sulfurreducens nor G. anodireducens can grow with nitrate provided as an electron acceptor. However, it is interesting that G. soli was reported to grow with nitrate provided as the sole electron acceptor.27 Further investigation into the mechanism for nitrate reduction used by G. soli is required.
The G. anodireducens genome has 87 genes that could potentially code for c-type cytochrome proteins (ESI Table S2†). Four of these cytochromes are predicted to be localized to the inner membrane, 24 are extracellular or outer membrane associated, and 24 are periplasmic. More than half (53.5%) of these c-type cytochromes have 5 or more heme groups and 30.2% have 2 to 4 hemes. Many of these c-type cytochromes have homologs in both G. soli and G. sulfurreducens (ESI Table S2A†). In addition, many of the c-type cytochromes that genetic, transcriptomic, proteomic, and genomic studies have identified as being critical for extracellular electron exchange by Geobacter have homologs in G. anodireducens (Table 3, ESI Table S2†).
Locus ID | SD-1 Locus ID | Abbreviation | Annotation | Impaired growth substrate(s) | References |
---|---|---|---|---|---|
GSU1761 | Ga0133348_111806 | pgcA | Soluble extracellular cytochrome c, class I | Fe(III) oxide | 31 and 34 |
GSU2724–GSU2726 | No homologs | extEFG | Outer membrane electron conduit complex | Fe(III) citrate, | 88 |
GSU2642–GSU2645 | Ga0133348_11946–11949 | extABCD | Porin–cytochrome (Pcc) complex | Anode | 88 |
GSU2936–GSU2940 | Ga0133348_113069–113073 | extHIJKL | Porin–cytochrome (Pcc) complex | Fe(III) citrate, anode | 88 |
GSU2731–GSU2739 | Ga0133348_11855–11861 | omcBC complex | Two tandem porin-cytochrome (Pcc) complexes | Fe(III) oxide, Fe(III) citrate, anode | 85 and 87–91 |
GSU3259 | Ga0133348_113383 | imcH | Inner membrane c-type cytochrome protein | Fe(III) citrate, Mn(IV) oxide | 82 |
GSU0274 | Ga0133348_11226 | cbcL | b/c-type cytochrome domain protein | Fe(III) oxide | 83 |
GSU2504 | Ga0133348_111108 | omcS | Outer membrane c-type cytochrome | 33 | |
GSU2076 | Ga0133348_111435 | omcZ | Outer membrane c-type cytochrome | Anode | 37 and 38 |
GSU0618 | Ga0133348_11695 | omcE | Outer membrane c-type cytochrome | Fe(III) oxide, Mn(IV) oxide, anode, AQDS | 32 and 33 |
GSU1496 | Ga0133348_112105 | pilA-N | Pilin domain protein | Fe(III) oxide, anode | 37, 39 and 101 |
GSU0612 | Ga0133348_11688 | ppcA | Periplasmic cytochrome c, class III | Fe(III) citrate | 35 and 84 |
GSU1394 | Ga0133348_112215 | ompB | Multicopper oxidase protein | Fe(III) oxide, Mn(IV) oxide | 100 |
GSU2657 | No homolog | ompC | Multicopper oxidase protein | Fe(III) oxide | 99 |
GSU1501 | Ga0133348_112101 | xapD | ATP dependent transporter involved in exopolysaccharide biosynthesis | Fe(III) oxide, anode | 105 and 106 |
GSU1704 | Ga0133348_111888 | esnA | Mcp protein | Anode | 87 |
GSU2220 | Ga0133348_111374 | esnB | cheW scaffolding protein | Anode | 87 |
GSU2222 | Ga0133348_111372 | esnC | cheA histidine kinase | Anode | 87 |
GSU3376 | Ga0133348_1182 | esnD | Diguanylate cyclase | Anode | 87 |
Gmet_0557 | Ga0133348_113044 | omcP | Outer membrane c-type cytochrome | Fe(III) oxide | 32 and 35 |
Gmet_0558 | No homolog | omcO | Outer membrane c-type cytochrome | Fe(III) oxide | 32 and 35 |
Gmet_1867 | Ga0133348_111778 | c-type cytochrome | Fe(III) oxide | 32 | |
Gmet_1868 | Ga0133348_111777 | — | c-type cytochrome | Fe(III) oxide | 32 |
GSU2505 | Ga0133348_111106 | — | NHL repeat domain protein | Anode | 105 |
GSU3361 | Ga0133348_1198 | — | Transglutaminase domain protein | Anode | 105 |
Gmet_2029 | Ga0133348_111539 | — | Exopolysaccharide biosynthesis protein | Fe(III) oxide | 32 |
In order for Geobacter to use extracellular substrates as terminal electron acceptors, they need to be able to transfer electrons from the quinone/quinol pool in the inner membrane, across the periplasm and then across the outer membrane to the extracellular environment.3,80 Two inner membrane c-type cytochromes in G. sulfurreducens, the inner membrane cytochrome c (ImcH) and a cytochrome protein with b- and c-type domains (CbcL), appear to be involved in the early steps of electron transfer to extracellular substrates.81–83 ImcH is required for reduction of extracellular electron acceptors with reduction potentials greater than 0.1 V versus the standard hydrogen electrode (SHE) such as Fe(III) citrate and insoluble Mn(IV) oxides,82 while CbcL is important for electron transfer to low potential acceptors such as Fe(III) oxides.83 Homologs for both imcH and cbcL are present in the G. anodireducens, G. soli, and G. metallireducens genomes (Table 3, ESI Table S2B†). All four genomes also have homologs for PpcA, another periplasmic c-type cytochrome that is required for efficient reduction of Fe(III) citrate,84 but not insoluble Fe(III)-oxide or an electrode.35
Once periplasmic and inner membrane cytochromes shuttle electrons across the periplasm, they need to then be transferred across the outer membrane. Studies have suggested that porin cytochrome (Pcc) protein complexes, found in all Geobacter species that have been sequenced to date, act as electron conduits for transfer across the outer membrane.85,86 These conduits are composed of a periplasmic multiheme c-type cytochrome, a porin like outer membrane protein, and an outer membrane c-type cytochrome.85,87–91 The G. sulfurreducens genome has 5 gene clusters that code for putative Pcc complexes; ombB–omaB–omcB (GSU2737–GSU2739), ombC–omaC–omcC (GSU2731–GSU2733), extEFG (GSU2724–GSU2726), extABCD (GSU2642–GSU2645), and extHIJKL (GSU2936–GSU2940), each of which appears to shuttle electrons to different acceptors.87,88 The G. anodireducens, G. soli, and G. metallireducens genomes have homologs for all of the pcc complexes found in G. sulfurreducens except extEFG (Table 3, ESI Table S2B†).
OmcB, which is part of the ombB–omaB–omcB complex in G. sulfurreducens, is localized to the exterior surface of the outer membrane92 and is thought to transfer electrons to extracellular multiheme c-type cytochromes that act as terminal reductases.33,85 There is no homolog for omcB in G. metallireducens, although another c-type cytochrome (Gmet_0910) is found in a syntenous location.24 However, deletion of this gene did not impair Fe(III) oxide reduction.32 Both G. anodireducens (Ga0133348_11857) and G. soli (Ga0077628_11353) have omcB homologs with 84.09% and 83.82% amino acid sequence identity to that of G. sulfurreducens.
There also appears to be a considerable amount of variation in terminal c-type cytochromes between species and even within the same species. In G. sulfurreducens, the multiheme outer membrane c-type cytochrome, OmcS, is required for reduction of Fe(III)- and Mn(IV) oxides,33 the uptake of electrons during DIET79 and Fe(0),77 and anodes operated in fuel cell mode with thin biofilms.36 Immunogold labeling has shown that OmcS can localize along electrically conductive pili found on the G. sulfurreducens surface,93 and recent studies have suggested that it can form cytochrome based conductive filaments.94,95 OmcS also appears to be involved in electron transfer to insoluble Fe(III) oxide and anodes by G. soli.54 G. anodireducens also has a homolog for OmcS (Ga0133348_111108) with amino acid sequence identity of 95.16%. However, omcS homologs are not present in genomes from G. metallireducens or most other Geobacter species (Table 3, ESI Table S2†).3
Although most species within the genus Geobacter do not have OmcS, they all produce extracellular multiheme c-type cytochromes that can serve as terminal reductases. For example, the multiheme c-type cytochrome GscA (Gbem_3371) found in G. bemidjiensis was able to restore Fe(III) oxide reduction in the OmcS-deficient strain of G. sulfurreducens.96 In addition, while OmcS is required for efficient electron transfer from G. sulfurreducens to Fe(III) oxide,33 and in the reverse direction from an electron-donating partner during DIET,79 another extracellular multiheme c-type cytochrome (Gmet_2896) is needed for DIET and Fe(III) reduction by G. metallireducens.32,40 The outer membrane multiheme c-type cytochromes OmcP (GSU2913) and OmcO (GSU2912) are also not required for reduction of Fe(III) oxide by G. sulfurreducens,35 but their homologs (Gmet_0557 and Gmet_0558) are required for Fe(III) oxide respiration by G. metallireducens.32 G. anodireducens has a homolog for omcP (Ga0133348_113044) and two homologs for omcO (Ga0133348_113042 and Ga0133348_113043).
PgcA (GSU1761) is another extracellular c-type cytochrome that plays a role in Fe(III) reduction in some strains of Geobacter but not others.31,34 It is a soluble c-type cytochrome that is secreted into the extracellular environment to facilitate Fe(III) reduction.31,34 G. uraniireducens also releases a soluble electron shuttle that promotes Fe(III) oxide reduction,97 however, this shuttle was never characterized. The G. uraniireducens genome contains a gene that codes for a PgcA homolog (Gura_0706) which could have served as the shuttle and was significantly expressed in cells grown in Fe(III)-containing sediments.35,98 G. metallireducens does not have a PgcA homolog, however, homologs are found in both G. anodireducens (Ga0133348_111806) and G. soli (Ga0077628_111213) genomes (Table 3, ESI Table S2†).
Another multiheme outer surface c-type cytochrome, OmcZ, is required for electron transfer to anodes in flow-through systems with thick biofilms (>50 μm),37 but not for reduction of anodes with thin biofilms, Fe(III)- or Mn(IV) oxides by G. sulfurreducens.35,36 The homolog for omcZ in G. metallireducens (Gmet_0930) however, was essential for Fe(III) oxide reduction.32 Homologs for omcZ are found in all genomes analyzed in this study (Table 3, ESI Table S2†).
Other electron transport proteins that have been implicated in extracellular electron transfer from the G. sulfurreducens outer membrane include two outer membrane multicopper proteins (OmpB and OmpC),99,100 OmcE,33 and electrically conductive pili.101–103 All of the genomes have genes coding for OmcE and OmpB, but only the G. metallireducens genome has an ompC homolog (ESI Table S1†). A unique extracellular electron transfer component characteristic of Geobacter species is the presence of pilin monomers that have a structure that enables them to be electrically conductive.30,101–103 Conductive PilA subunits have >9% aromatic amino acid residues localized in specific regions along the protein and they do not have large gaps between the aromatic residues.29,30,104 Both the G. anodireducens and G. soli mature PilA monomers have 10.8% aromatic amino acids and their largest gap is 22 amino acids, which is the same as both G. metallireducens and G. sulfurreducens. Therefore, the G. anodireducens and G. soli pili are likely to be conductive.
Another series of proteins involved in electron transfer to poised anodes are part of an electrode sensing network (Esn) and include an MCP (EsnA, GSU1704), a CheW-like scaffolding protein (EsnB, GSU2220), a CheA-like histidine kinase (EsnC, GSU2222), and a diguanylate cyclase (EsnD, GSU3376).87 It has been proposed that these Esn proteins regulate the accumulation of cyclic di-GMP, which is involved in biofilm formation.87,107,108 All of the genomes analyzed in this study have genes coding for all of the Esn proteins (Table 3, ESI Table S2B†).
Other proteins implicated in electrode and/or Fe(III) reduction by G. sulfurreducens that are not considered electron transport proteins include an NHL repeat domain protein (GSU2505) located just downstream from the omcS gene that might be required for proper assembly and/or expression of OmcS, and a transglutaminase domain protein (GSU3361) likely involved in posttranslational modification of proteins involved in extracellular electron transport.105 All four genomes from this study have both of these genes (Table 3, ESI Table S2B†).
The mechanosensitive ion channel (Msc) proteins are involved in protection from osmotic shock and are induced in response to high salt concentrations in some bacteria.110 Six different genes coding for mechanosensitive ion channel proteins were found in the G. anodireducens (Ga0133348_112933, Ga0133348_111255, Ga0133348_111279, Ga0133348_111853, Ga0133348_111966, Ga0133348_112030), G. soli (Ga0077628_112329, Ga0077628_11701, Ga0077628_11719, Ga0077628_111256, Ga0077628_111444, Ga0077628_111502) and G. sulfurreducens (GSU2794, GSU1557, GSU1633, GSU1723, GSU2316, GSU2357) genomes compared to only three in the G. metallireducens genome (Gmet_2522, Gmet_1942, Gmet_2581), suggesting that these proteins might also help Geobacter survive osmotically stressful environments like those with elevated salt concentrations.
Studies have also shown that many other stress response genes including oxidative stress, heat shock, and universal stress genes are more significantly expressed on anode surfaces and when Fe(III) serves as an electron acceptor.98,111,112 Analysis of other stress response genes (i.e. oxidative stress, heat shock proteins, and universal stress proteins) did not reveal any apparent differences among the four Geobacter species (ESI Table S3†).
Footnote |
† Electronic supplementary information (ESI) available: Supplementary data related to this article can be found in the online version. See DOI: 10.1039/c9ra02343g |
This journal is © The Royal Society of Chemistry 2019 |